New Promotions Available! Browse them!

Keysight EXR058A digital oscilloscope 500 MHz, 16 GSa/s, 8 Channels

Keysight EXR058A digital oscilloscope 500 MHz, 16 GSa/s, 8 Channels
Keysight EXR058A Infiniium EXR-Series Real-Time Oscilloscope, 500 MHz, 16 GSa/s, 8 Ch


Meet the Infiniium EXR-Series

Welcome to your all-new Infiniium EXR-Series. With eight models ranging in performance from 500 MHz to 2.5 GHz, 4 or 8 analog channels, and dozens of hardware and software options, your Infiniium EXR- Series is powerful, easy to own, and intuitive to use.

See More with World-Class Signal Integrity
Each model incorporates a 10-bit ADC with a sample rate of 16 GSa/s available on all channels simultaneously. A high-resolution ADC’s usefulness is dependent on the low-noise front end that supports the additional quantization levels. Our low noise front end includes custom ICs, like the 130 nm BiCMOS IC that incorporates user-selectable analog filters and bandwidth upgrades via a software license. This gives you:
• Four times more vertical resolution than 8-bit oscilloscopes
• Up to 16 bits with high-res mode
• As low as 43 μV of noise, 9.0 bits system ENOB with hardware filtering

Infiniium EXR-Series main specifications:

Analog channels 4 or 8, upgradeable
Bandwidth 500 MHz to 2.5 GHz, upgradeable
Sample rate 16 GSa/s on every channel
Memory 100 Mpts, upgradeable to 400 Mpts
Resoluiton 10 bits, up to 16 with high resolution
ENOB As high as 9.0
Timebase accurancy 8 parts per billion
Intrinsic Jitter As low as 118 fs
Noise (1 mV/div) As low as 43 μV
Digital lofic channels 16, dedicated input, upgradeable
Update rate > 200,000 wfm/s
Screen display 15.6” touch, full HD, dual screen support


















Ease of Ownership
Save Budget and Bench Space with Instrument Integration
Your Infiniium EXR-Series is more than just an oscilloscope - it’s 7 instruments in 1. Keysight pioneered multiple-instrument integration with the release of the mixed signal oscilloscope (MSO) in 1996. The InfiniiVision 2000/3000/4000 X-Series took the concept to the next level by integrating five instruments in one in 2011. The Infiniium EXR-Series integrates seven instruments in one. They are pictured on the right of this page, to scale, next to an EXR258A.
• 8 high-speed analog oscilloscope channels
• 16 digital channels (logic analyzer)
• 50 MHz arbitrary waveform generator
• 50 MHz frequency response analyzer
• 10-digit counter
• 4-digit voltmeter
• Protocol analyzer

Having all these tools integrated into your oscilloscope has many benefits aside from the obvious space and budget simplifications. One user interface means a lower learning curve when you need to use one of the integrated tools. It also means fewer pieces of instrumentation to store, calibrate, and keep updated on firmware.

The counter and DVM are standard features, and special because they use a separate signal path, different than the captured waveform, to make their measurements. This makes them much more accurate, flexible, and user friendly than standard on-screen measurements. Simply connect a probe or cable to an unused channel – no need to scale, trigger, or otherwise set the signal up on screen to make basic frequency and voltage measurements!

The logic analysis, AWG, and FRA can be purchased at any time for permanent installation to your EXR-Series. The variety of protocol analysis capabilities can be purchased for different lengths of time, to best fit your budget and project needs at the moment, or permanently.

Write a review

Note: HTML is not translated!
    Bad           Good


Tags: keysight-exr-series