⬇️ DOWNLOAD THE NEW RIGOL CATALOG ⬇️

Micsig DP10013 High Voltage Differential Probe 1300V, 100MHz

-11% Micsig DP10013 High Voltage Differential Probe 1300V, 100MHz

Discontinued model, click here to view the new series

Micsig DP10013 High voltage differential probe with 100MHz bandwidth and up to 1300V voltage.

Micsig DP Series High Voltage Differential Probes can be used with any brand of oscilloscope.
It adopts high-impedance isolation between the input and output to protect personal safety, converts the input high-voltage signal to a low-voltage signal for observation and analysis on oscilloscope.

Features:
- Light weight and compact size, easy to carry
- Powered by USB output (DC 5V) from oscilloscope, apply easily to floating measurements.
- Easy self-calibration
- No mechanical switches, support self-illuminating button
- USB DC power output, convenient for cascading power supply when multiple probes are used at the same time

Model DP10007 DP10013 DP20003
Bandwidth 100MHz 100MHz 100MHz
Rise time ≤3.5ns ≤3.5ns ≤3.5ns
Attenuation 10X, 100X 50X, 500X 200X, 2000X
Gain accuracy ±2% ±2% ±2%

Max. Differential Test Voltage (DC+AC PK)

70V(10X)
700V(100X)
130V(50X)
1300V(500X)
560V (200X)
5600V(2000X)
Max. input common mode voltage CAT II 600V
CAT I 1000V
CAT II 1000V CAT III 1000V
Input referred noise ≤ 15mVrms (10X)
≤ 60mVrms (100X)
≤ 40mVrms (50X)
≤ 230mVrms (500X)
≤ 160mVrms (200X)
≤ 920mVrms (2000X)
Common Mode Rejection Ratio >80dB@50Hz / DC
>60dB@20KHz
>45dB@1MHz
>80dB (DC)
>60dB (100KHz)
>50dB (1MHz)
>80dB (DC)
>60dB (100KHz)
>50dB (1MHz)
Input Impedance 8MΩ/1.25pF (differential)
4MΩ/2.5pF (single end to ground)
10MΩ/1pF (differential)
5MΩ/2pF (single end to ground)
50MΩ/1.25pF (differential)
25MΩ/2.5pF (single end to ground)
Output Voltage ≤ 7V ≤ 3V ≤ 3V
Power 1.25W 0.85W 0.85W
Power supply DC 5V, USB Supply
Overrange Alarm Button Light Flashes
Dimension 14.5cm x 6cm x 2.7cm
Input cable length ≈ 45cm
Output cable length ≈ 90cm
Temperature 0°C ~ 45°C
Humidity 10% ~ 85%

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email info@batterfly.com

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

  • Views: 20373
  • Brand: Micsig
  • Product Code: DP10013
  • MPN: DP10013
  • Units in stock ⟹ 1
  • Price NET:
  • 189,00€
  • 169,00€
  • Save 11%
  • Price VAT included: 230,58€ 206,18€

Tags: micsig-dp-series

HAKKO Omnivise C1390C height adjustment PCB holder (1 piece)The main image represent the C1390C in t..
70,00€
Discontinued model, click here to view the new modelHAKKO FX-801 Soldering Station Super Power 300 W..
680,00€
Hakko B3474 Rubber Cleaner for Hakko FH-800 Iron Holder ..
3,50€
HAKKO FX-951 Compact High-Power Thermally-Controlled Soldering IronIncludes:1 x Soldering Station (H..
346,00€
Discontinued model, click here to view the new modelHAKKO FX-950 Stazione Saldante with analog know ..
225,00€