New Promotions Available! Browse them!

RIGOL DL3021A DC Electronic Load single output 150V, 40A, 200W

RIGOL DL3021A DC Electronic Load single output 150V, 40A, 200W

RIGOL DL3021A DC Electronic Load single output 150V, 40A, 200W

RIGOL DL3000 series General Specifications:
- DL3021/DL3021A: single output, 150 V/40 A, total power up to 200 W
- DL3031/DL3031A: single output, 150 V/60 A, total power up to 350 W
- Dynamic mode: up to 30 kHz
- Adjustable current rising speed: 0.001 A/μs to 5 A/μs
- Min. readback resolution: 0.1 mV,0.1 mA
- 4.3-inch TFT LCD, capable of displaying multiple parameters and states simultaneously
- Overvoltage/overcurrent/overpower/overtemperature/reverse voltage protection
- 4 static modes: CC, CV, CR, CP
- 3 dynamic modes: continuous, pulsed, toggled
- List function supports editing as many as 512 steps
- Battery test function, OCP test, OPP test, factory test function, etc.
- Short-circuit test function
- Power-off memory function
- Built-in RS232/USB/LAN communication interface
- USB-GPIB module (optional)

DL3000 is a cost-effective programmable DC electronic load with high performance. With a user-friendly interface and superb performance specifications, DL3000 series provides various interfaces for remote communication to meet your diversi ed test requirements. It can be widely used in various industries, such as automotive electronics, aerospace, and fuel cells.

Main differences between DL3000 and DL3000A

  DL3021 DL3021A
CC Continuous Mode
Frequency Range
0.001Hz - 15kHz 0.001Hz - 30kHz

  DL3021
Low Range
DL3021
High Range
DL3021A
Low Range
DL3021A
High Range
CC Slew Rate 0.001A/μs ~ 0.25A/μs 0.001A/μs ~ 2.5A/μs (>5V) 0.001A/μs ~ 0.3A/μs 0.001A/μs ~ 3A/μs (>5V)

  DL3021 DL3021A
Current ReadBack
Resolution
1mA 0.1mA
Interfaces DL3021 DL3021A
USB DEVICE YES YES
USB HOST YES YES
RS232 YES YES
LAN OPTIONAL YES
DIGITAL I/O OPTIONAL YES
GPIB OPTIONAL OPTIONAL


RIGOL DL3000 Design Features:

30 kHz dynamic mode
Transient test function enables the load to periodically switch between two set levels (Level A and Level B). It can be used to test the transient characteristics of the DUT. The highest frequency can be set to 30 kHz. Besides, in the guide interface, you can configure parameters in the parameter configuration list and view the configuration diagram at the left of the configuration list in the real-time manner.

5 A/μs current rising speed
Current rising speed is de ned as the speed of transition from one setting to another. You can set the actual transition time from one setting to another by changing the current rising speed. Adjustable current rising speed: 0.001 A/μs to 5 A/μs.

Powerful list operation function
You can generate complex sequences by editing the setting value for each step, the dwell time, and slew rate (the slew rate can only be edited in CC mode) to meet the complex test demands.

Powerful waveform display function 
The electronic load provides the waveform display function and supports the following operations for the waveform, such as pausing the waveform, enlarging and narrowing the waveform, and capturing the waveform. Therefore, you can dynamically observe the trend of parameters changes

Easy-to-use function of  le storage and recalling
The load allows you to save different types of files to the internal and external memories. You can recall and read them when necessary.

Sound OVP/OCP/OPP/OTP/Reverse Voltage Protection
When OVP/OCP/OPP/OTP/reverse voltage protection occurs, the load will immediately turn off the input automatically and stop sinking. Then, a prompt message is displayed.


Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 5240
  • Brand: RIGOL
  • Product Code: DL3021A
  • MPN: DL3021A
  • Warranty: 3 anni
  • Availability: 1 Week
  • Price NET:
  • 607,00€
  • Price VAT included: 740,54€

Tags: rigoldl3000