Rohde & Schwarz, trigger and decode software options

Posted by gm77 20/03/2020 0 Comment(s) 125 Test & Measurement,

Select from a wide range of application options dedicated to advanced debugging and analysis. Expand the analysis capabilities of your Rohde & Schwarz oscilloscope with application options dedicated to triggering and decoding of protocols.
Contact us if you want to receive more information about your specific application.
 

Bus measurements
All
Bus measurement for serial protocol decoding

100BASE-T1/BroadR-Reach®
Automotive
Triggering and decoding of 100Base-T1/BroadR-Reach®

8b10b
Embedded
Universal decoding of 8b10b buses

ARINC
Aerospace
Triggering and decoding of ARINC 429 buses

CAN/LIN
Automotive
Triggering and decoding of CAN and LIN interfaces

CAN-FD
Automotive
Triggering and decoding of CAN-FD

CXPI
Automotive
Triggering and decoding of clock extension peripheral interface (CXPI) buses in line with SAE J3076

 

 

Ethernet
Embedded
Decoding of 10BASE-T and 100BASE-TX Ethernet

FlexRay™
Automotive
Triggering and decoding of FlexRay™ buses

I²C/SPI
Embedded
Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses

I²S
Audio
Triggering and decoding of I²S buses

Manchester and NRZ
Configurable
Triggering and decoding of any Manchester and NRZ coded serial protocol such as Profibus PA, DALI, MVB and many proprietary protocols

MDIO
Embedded
Triggering and decoding of MDIO

MIL-1553
Aerospace
Triggering and decoding of MIL-STD-1553 buses

MIPI D-PHY
Mobile communications
Triggering and decoding of the MIPI D-PHY based protocols DSI and CSI-2

MIPI M-PHY
Mobile communications
Triggering and decoding of the MIPI M-PHY physical layer and the UniPro protocol layer

MIPI RFFE
Mobile communications
Triggering and decoding of the MIPI RFFE-protocol

PCIe 1.1/2.0
Embedded
Triggering and decoding of PCI Express Gen 1.1 and 2.0 signals

UART/RS232
Embedded
Triggering and decoding of UART based protocols and RS-232, RS-422 and RS-485 buses

SENT
Automotive
Triggering and decoding of fast channel and short and enhanced serial messages. Meets SENT SAE J2716 v2010 and legacy standard.

SpaceWire
Aerospace
Triggering and decoding of SpaceWire data & communication buses.

USB 1.0/1.1/2.0/HSIC
Embedded
Triggering and decoding of all USB 1.x/2.0 data rates: high speed (480 Mbit/s), full speed (12 Mbit/s) and low speed (1.5 Mbit/s)

USB 3.1 Gen 1/2
Embedded
Triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals

USB power delivery
Embedded
Triggering and decoding of USB power delivery (USB-PD) signals

USB-SSIC
Embedded
Triggering and decoding of USB-SSIC signals

Leave a Comment