SELECT LANGUAGE AND SHIPPING COUNTRY

AimTTi MX100TP triple output laboratory power supplies 315 Watts with GPIB, RS-232, USB and LAN (LXI) interfaces

AimTTi MX100TP triple output laboratory power supplies 315 Watts with GPIB, RS-232, USB and LAN (LXI) interfaces

AimTTi MX100TP triple output laboratory power supplies 315 Watts with GPIB, RS-232, USB and LAN (LXI) interfaces

Three high performance outputs of 105 watts each 3 x (0 to 35V at 0 to 3A)
Total power of 315 watts in a highly compact package
Range switching gives up to 70 volts and up to 6 amps
Twelve range combinations for maximum flexibility
Up to 210 watts from a single output
Low output noise and ripple via linear final regulation
High setting resolution of 1mV and 0.1mA (output 1)
Variable OVP and OCP trips on all outputs
50 setting memories per output + 50 linked memories
Selectable voltage tracking (isolated tracking)
Selectable current meter averaging
Switchable remote sense on all outputs
Graphic LCD provides simultaneous output metering
Numeric or spin-wheel control of all parameters
Individual or combined output on/off control with programmable delay sequencing.
Front panel locking with optional pass-code protection
3U half-rack case for bench or rack mounting
GPIB, RS-232, USB and LAN (LXI) interfaces (MX100TP)

A new power supply generation
The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi.
Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a large backlit graphic LCD and soft keys.
The first models in the MX Series, the 315 watt triple output MX100T and MX100TP are available now.

Three full-performance outputs - 3 x 105 watts

The MX100T differs from most other triple output power supplies in having three outputs of equal power, each with the ability to provide 0 to 35V at 0 to 3A.

Each output features simultaneous high resolution metering, switchable remote sense, and an individual output switch.

Mixed-mode regulation
To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design.

Excellent line and load regulation is matched by low noise and good transient response.

Range switching and power control

To increase its ability to match a variety of applications, each output has more than one range.

Outputs one and two can provide 16V/6A as an alternative to 35V/3A, while output three can provide 70V/1.5A.

When higher power is required, outputs two and three can be combined internally to provide up to 210 watts as either 35V/6A or 70V/3A from a single output.

        

Remote control for system applications

The MX100TP incorporates USB, RS232, GPIB and LXI compliant LAN interfaces.

These provide full remote control and read-back capabilities and are supported by an IVI driver for high level language applications.

Duplicate power and sense terminals are incorporated at the rear.

The compact half-rack 3U size uses  front input ventilation which enables vertical and horizontal stacking without the need for additional ventilation space.

A 3U rack mount suitable for one or two units is available.

Model MX100T/TP MX100Q/QP MX180T/TP
No. Outputs 315 watts 420 watts 378 watts
Max. total power 105W + 105W + 105W or 105W + 210W
105W + 105W + 105W + 105W or 105W +105W + 210W
or 210W + 210W
180W + 180W + 18W or 360W + 18W
Max. Volts/Amps from single unit 70V or 6A 70V or 6A 120V or 20A
Output 1 ranges 16V/6A, 35V/3A, 35V/6A* 16V/6A, 35V/3A, 35V/6A* 15V/10A, 30V/6A, 60V/3A
Output 2 ranges 35V/3A, 70V/1.5A, 70V/3A* 35V/3A, 70V/1.5A, 70V/3A* 5.5V/3A, 12V/1.5A
Output 3 ranges 35V/3A, 70V/1.5A, 70V/3A* 35V/3A, 70V/1.5A, 70V/3A* 5.5V/3A, 12V/1.5A
Output 4 ranges - 35V/3A, 70V/1.5A, 70V/3A* -


* range available subject to another output being disabled (shared power mode).

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha
  • Views: 4686
  • Brand: AimTTi
  • Product Code: MX100TP
  • Availability: In Stock
  • Price NET:
  • 1.091,00€
  • Price incl 22% VAT: 1.331,02€

Tags: aimttimx100

Testimonials

pcbite needles must have for seroius electronics. Very good quality and fast delivery.

andrej campa on 14/10/2019

Fastest service and shipping ever! Shipping to Spain arrived in less then 48 hours Perfect, thank you!

Ronen Geva on 08/10/2019