GW Instek GSP-818 RF spectrum analyzer 9kHZ - 1.8GHZ

GW Instek GSP-818 RF spectrum analyzer 9kHZ - 1.8GHZ
The GW Instek GSP-818 is a RF spectrum analyzer at a very attractive price, which supports a frequency range from 9kHz to 1.8GHz and provides testing requirements for RF products during the development/production phases. The GW Instek GSP-818 has a built-in 20dB amplifier and provides an adjustable range of resolution bandwidth (RBW) from 10Hz to 3MHz. In addition, it has the AM/FM signal demodulation function and the ACPR/OCBW/CHPW test functions to meet the requirements of general RF signal measurement.

In addition, the built-in Time Spec function of GW Instek GSP-818 can simultaneously view the correlation between display power, frequency and time. The Bandwidth Zoom function can be used to view the spectrum performance of signals under different Span. The Limit Line function provides two different Limit Line settings: Windows Measure and Limit Line Measure. Users can use these functions for a wider range of measurement applications.

To achieve clearer signal observation, GW Instek GSP-818 utilizes a 10.4” large screen with SVGA (800 * 600) resolution. Pertaining to the communications interface, GW Instek GSP-818 provides both USB, LAN interfaces and VGA output. Via the USB Host, users can quickly retrieve the files saved after measurements. The USB Device and LAN interface allow users to control through the dedicated PC software or to use the required program designed by the corresponding commands.

Main technical specifications:
- Frequency range: 9kHz - 1.8GHz
- Frequency stability: 2.5ppm, 1ppm/yr
- RBW range: 10Hz - 500kHz in 1-10 steps, 1MHz, 3MHz
- VBW range: 10Hz - 3MHz
- Phase noise: -82dbc/[email protected], 10kHz offset
- Noise floor: -148dbm @PreAmp On
- Measurement range: from -148dBm to +20dBm
- Overload Protection: +30dBm, +/-50VDC
- Input attenuator: form 0 to 39dB in 3dB steps
- Pre amplifier: built in 20dB internal
- Measurement functions: ACPR, OCBW, CHPW,N-dB
- Display modes: spectrum mode, time spec, zoom in/out
- Other functions: limit line
- Display: 10.4" TFT LCD with SVGA
- Tracking generator: from 100kHz to 1.8GHz (optional)
- Demodulation: AM/FM
- Interfaces: USB/LAN/VGA

Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 1370
  • Brand: GW Instek
  • Product Code: GSP-818
  • Availability: In Stock
  • Price NET:
  • 1.095,00€
  • Price incl 22% VAT: 1.335,90€

Tags: gwinstek-gsp818

Testimonials

Ho acquistato osc, Digilent, spedizione velocissima e comunicazione perfetta. Ottimo.

Massimo, Varese on 29/05/2020

Very good service and fast reply. Higly recommended.

Per Ekström on 27/05/2020