TekBox TBLC08 LISN AC - CISPR 16
Click Image for Gallery
TekBox TBLC08 50uH LINE IMPEDANCE STABILISATION NETWORK LISN - CISPR 16
OVERVIEW
The TBLC08 is a Line Impedance Stabilization Network for the measurement of line-conducted interference within the range of 9kHz to 30MHz, according to the CISPR16 standard. The device is designed for testing single phase, AC-powered equipment with supply voltages up to maximum 240V. Conducted noise can be measured on the phase and on the neutral conductor. The TBLC08 is equipped with a switchable limiter/attenuator and an artificial hand connection.
The device comes with the Schuko socket DUT connectors
SPECIFICATIONS
Frequency range: 9 kHz to 30 MHz
Impedance: 50 Ω ║ (50 µH + 5 Ω)
Artificial hand: 220 pF + 511 Ω
Switchable PE: 50 Ω ║ 50 µH
Limiter / attenuator: 150 kHz to 30 MHz; 10 dB
Air core inductors
Line voltage: max. 240V / 50 – 60 Hz, CAT ‖
Max. current: 8A @ 23°C
DUT socket: country specific
Measurement connector: 50 Ω BNC
Power connector: IEC 60320 C13
Operating Temperature Range: +5°C … + 40°C; 5% to 80% RH
Safety: Safety Class I, IEC 1010-01
APPLICATION
EMC pre-compliance testing of conducted noise
Conducted noise pre-compliance measurement setup

We can provide the full EMI KIT composed by:
- RF Spectrum Analyzer with EMI Filter and Quasi Peak options
- EMI PC Software
- Near Field Probe kit
- LISN CISPR 16
- Isolation Transformer
Conducted noise pre-compliance measurement setup

We can provide the full EMI KIT composed by:
- RF Spectrum Analyzer with EMI Filter and Quasi Peak options
- EMI PC Software
- Near Field Probe kit
- LISN CISPR 16
- Isolation Transformer
EMI KIT starting at Euro 3265 + VAT (spectrum analyzer RIGOL DSA815)
contact us for more info: Tel. (+39) 051 6468377 e.mail [email protected]


contact us for more info: Tel. (+39) 051 6468377 e.mail [email protected]

1) Mains switch
2) Auxiliary case earth connector, safety banana jack
3) Protective Earth switch to connect DUT earth either directly to case earth, or via 50μH ║ 50 Ohm
4) Artificial hand connector, safety banana jack
5) DUT socket, country specific
6) RF path selection, 0 (neutral), OFF, 1 (phase)
7) 50 Ω RF output, BNC jack
8) Limiter + 10 dB attenuator + 150kHz high pass filter switch

9) Power connector: IEC 60320 C13
10) Fuse, 8A, slow
11) Fuse, 8A, slow
12) Ground strap block, connected to earth, 4mm thread
Testimonials
Ho acquistato una lente da ingrandimento da testa. Ottima esperienza; imballo perfetto. Lo consiglio. |
DUR on 14/01/2021 |
All good as usual, many thanks to the Batterfly team! |
Julien Asencio on 13/01/2021 |