Vaporflow 275 Vapour Phase Reflow Oven

Vaporflow 275 Vapour Phase Reflow Oven

The Vaporflow 275 is a reflow oven that uses vapour phase to reflow solder circuit boards. Problems that occur with small infrared or convection ovens are a thing of the past. Components with large thermal mass, fine pitch, or with black plastic are easily soldered using this oven.

The Vaporflow heats a special liquid to soldering temperature, creating a vapor that coats the circuit board. This vapor heats the circuit board very uniformly to 1 temperature. The uniform heating makes soldering circuit boards with various components very easy.

The Vaporflow provides a stainless steel container in which the circuit boards are placed on a tray. At the bottom of the kettle is a layer of liquid. The kettle is sealed with a lid. The vaporflow heats the liquid according to a pre-programmed profile. A sensor monitors the temperature inside the container. When the circuit board is soldered, the vapor is cooled again against the walls of the oven with powerful fans.

The soldering temperature is determined by the chosen vapor phase liquid. The standard liquid is Galden LS230, with which all common leaded and lead-free printed circuit boards can be soldered. The Vaporflow can handle all vapor phase liquids with temperatures between 180 and 240℃.

With the touch screen, the soldering process can be started and stopped. During soldering, a graph is displayed with the measured and set temperatures. All values can be logged to an SD Card. Custom soldering profiles can also be created for specific applications or fine-tuning.

The Vaporflow features multiple safeguards to prevent overheating. A sensor detects if the lid is placed.

The Galden liquid is expensive per liter, but its consumption in soldering is very low, so the overall running cost of the Vaporflow is low.

- Very consistent results due to uniform heating
- Handles well components that are difficult to solder with other furnaces
- Overheating of the circuit board is impossible
- Clear touch screen
- Custom solder profiles can be created
- Solder cycle can be logged to SD card as CSV file

What's in the box:
1x Vaporflow 275
1x 400 grams Galden LS230
1x Power cord
1x Platform for PCBs
1x Liquid dipstick
1x Syringe
1x Manual

* The required Galden liquid is not included. We recommend that the oven, like conventional ovens, be used only in a well-ventilated room, or with a vapor extractor.


Maximum PCB Length 235 mm
Maximum PCB Width 170 mm
Temperature Range by Choice Liquid 180 - 240 °C
Duration of Soldering Cycle 14 minutes

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email info@batterfly.com

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

  • Views: 2227
  • Brand: BFESD
  • Product Code: ELE005612
  • MPN: ELE005612
  • Units in stock ⟹ 0, lead time 2 weeks
  • Price NET:
  • 1.595,00€
  • Price VAT included: 1.945,90€