Earth Bonding Point Bar with 3x10mm male studs, yellow color, included 3 m. cord. Desco 231275 Batter Fly BF000117.
The Groung Nodes EBP (Earth Bonding Point) is used on the tables of the EPA area to link together the work plan, the floor and the bracelet.
Each entry of EPB has a 1MΩ resistor and the output cable, 3 meters long, must be grounded
Designed to be mounted on under-side of bench top or shelf
Supplied with screws and spare ring terminal,
Black cord 3m long, exits via strain relief on right
Fitted with three 1 megohm 1/2 Watt resistors
EBP 231305 Desco is 72mmx37mmx38mm size and is made of ABS. The yellow barhasa rear cover to prevent access to the resistors.
Resistors are usually built-in to each connector. The normal earth contact is linked via individual 1 megohm resistor rated at 1/2W. In the event of a workstation element becoming live the resistor will limit the fault current to less than 0.3mA at 240V. The resistor is capable of withstanding 500VDC for 6 minutes.
- The EBP bar should be fixed to the edge of a bench or other suitable work equipment within reach and accessible to all connecting ground cords, but where it is unlikely to be knocked and damaged or hinder the operator.
- Mount EBP bar with two M5 pan-head screws (included), minimum 12mm long.
- Connect earthing cord to a suitable earth. A spare ring terminal is supplied if the cordneeds to be shortened.