EA Elektro-Automatik EA-10000 Series Programmable Bidirectional DC Power Supplies Description
PURE & POWERFUL
NEW: EA-10000 Industrial Series
With 60 kW in 6U. With 30 kW in 4U. With up to 300 kW in a single rack.
EA-10000 Industrial Series
Conventional, Bidirectional and Regenerative
Powerful performance
◆ 6U Power with 60 kW including 21 models
◆ 4U Power with 30 kW including 29 models
◆ Large selection of 50 models for special applications
Powerful rack performance
◆ A 19“ rack with 42 U for a system with 300 kW
◆ One unit with up to 13 racks with 64 units of 60 kW each
◆ For high power applications up to 3.84 MW
Powerful efficiency
◆ Fewer units for a high-power system
◆ Less rack space required
◆ Less operating costs
The single units with new 4U/6U power:
◆ Programmable DC power supplies EA-PU 10000 4U/6U
◆ Programmable bidirectional DC power supplies EA-PUB 10000 4U/6U
◆ Regenerative electronic loads EA-PUL 10000 4U/6U
The rack power with up to 300 kW:
◆ Operation of one 19“ rack with 42U for a system with 300 kW on only 0.6 m² floor space
◆ Operation of up to 13 racks with a maximum of 64 units of 60 kW each as one unit
◆ For high power applications up to 3.84 MW
◆ Parallel operation of 10000 Series units of all power ratings
◆ Configure high-performance systems with fewer devices
◆ Saving critical rack space
◆ More power in a small footprint
For future-oriented applications:
◆ Tests of batteries and fuel cells
◆ Simulations of batteries and solar systems
◆ The complete discharge of batteries for recycling
◆ The fail-safe power supply of electrolysis plants
◆ Sustainable power electronics for aviation applications
◆ For use in ATE systems and automated process control systems
The high-tech features:
◆ DC input / output with autoranging
◆ Digital (FPGA) controlled DC input / output U – I – P – R
◆ Latest SiC technology
◆ LED‘s in the front to indicate the status of the device
◆ Optional stainless steel water cooling
◆ AC mains input with extended range (380 V – 480 V, 3ph AC)
◆ Built-in interfaces: Ethernet, USB, Analog
◆ Optional Interfaces: CAN, CANopen, EtherCAT, RS232, Profibus, Profinet, Modbus, Ethernet
For efficiency and sustainability:
◆ Master-Slave-Bus and Share-Bus
◆ To make a multi-device system behave like a single device
◆ Energy recovery up to over 96 %.
◆ Regenerative load operation with energy recovery into the grid
◆ Autoranging
◆ The principle of automatic switching
◆ Optional: Function generator and more
◆ Ramp function, arbitrary generator, LUT, integrated PV characteristic curve
◆ Variety of devices for every requirement
◆ 21 models in 60 kW series and 29 models in 30 kW series
Optionally available:
◆ Emergency stop (machine standards EN60204-1)
◆ Grid monitor (ENS)
◆ Insulation monitor
◆ Copper busbar for DC output
Leave a Comment