PicoScope 6403D PC Oscilloscope 4 channels with FG/AWG, 350 MHz, 1 GS buffer

PicoScope 6403D PC Oscilloscope 4 channels with FG/AWG, 350 MHz, 1 GS buffer

PicoScope 6403D PC Oscilloscope 4 channels with FG/AWG, 350 MHz, 1 GS buffer

4 channels.
500 MHz bandwidth.
5 GS/s real–time sampling.
2 GS memory!
Arbitrary waveform generator.
Serial decoding.
Mask limit testing.
USB 3.0 interface.

Over two decades of oscilloscope design experience has resulted in the PicoScope 6000 Series — the ultimate in USB oscilloscope design.

Selection table:

Product Channels Bandwidth Sampling Rate Buffer Memory Resolution (Enhanced)
6402C 4 250 MHz 5 GS/s 256 MS 8  (12 bits)
6402D 4 250 MHz 5 GS/s 512 MS 8  (12 bits)
6403C 4 350 MHz 5 GS/s 512 MS 8  (12 bits)
6403D 4 350 MHz 5 GS/s 1 GS 8  (12 bits)
6404C 4 500 MHz 5 GS/s 1 GS 8  (12 bits)
6404D 4 500 MHz 5 GS/s 2 GS 8  (12 bits)
6407 4 1 GHz 5 GS/s 1 GS 8  (12 bits)


PicoScope 6400 USB Oscilloscope Specifications

Oscilloscope — Vertical
Model PicoScope 6402C PicoScope 6402D PicoScope 6403C PicoScope 6403D PicoScope 6404C PicoScope 6404D
Analog Bandwidth*
(-3 dB)
250 MHz
(200 MHz ±50 mV range)
350 MHz
(250 MHz ±50 mV range)
500 MHz
(all ranges)
Hardware Bandwidth limiter Switchable, 20 MHz Switchable, 25 MHz
Rise time
(10% to 90%, calculated)
1.4 ns (50 mV range 1.8 ns) 1.0 ns (50 mV range 1.4 ns) 0.7 ns (all ranges)
Vertical resolution 8 bits
Enhanced vertical resolution 12 bits
Input sensitivity 10 mV/div to 4 V/div at x1 zoom (1 MΩ input), 10 mV/div to 1 V/div at x1 zoom (50 Ω input)
Input ranges (full scale) ±50 mV to ±20V, in 9 ranges (1 MΩ input)
±50 mV to ±5V, in 7 ranges (50 Ω input)
Input characteristics 1 MΩ in parallel with 15 pF (AC or DC coupling) or 50 Ω (DC coupling) 1 MΩ in parallel with 10 pF (AC or DC coupling) or 50 Ω (DC coupling)
Analogue offset range
50 mV  to 200 mV ranges
500 mV range
1 V range
2 V range
5 V range
10 V range
20 V
Available offset
±0.5 V
±2.5 V
±2.5 V
±2.5 V
±20 V (50 Ω ±0.5 V)
±20 V
±20 V
Available offset
±2 V
±10 V (50 Ω ±5 V)
±10 V (50 Ω ±4.5 V)
±10 V (50 Ω ±3.5 V)
±35 V (50 Ω ±0.5 V)
±30 V
±20 V
DC accuracy 3% of full scale
Input type Single–ended, BNC connector
Overvoltage protection ±100 V to ground (1 MΩ inputs), 5.5 V RMS (50 Ω inputs)

*Quoted bandwidth is with supplied probes or at BNC when 50 Ω impedance selected

Dynamic performance
Noise 200 μV RMS (50 mV range) 320 μV RMS (50 mV range)
THD –55 dB typical –54 dB typical
SFDR 60 dB typical 55 dB typical
Crosstalk 17 000:1 typical at 20 MHz
1000:1 typical at full bandwidth
5600:1 typical at 20 MHz
560:1 typical at full bandwidth


Oscilloscope — Horizontal
Maximum sampling rate (single shot)
1 channel in use
2 channels in use
3 or 4 ch. in use

5 GS/s
2.5 GS/s **
1.25 GS/s
Maximum sampling rate (repetitive signals) 50 GS/s
Maximum sampling rate
(continuous streaming mode)
10 MS/s using PicoScope. >150 MS/s using the supplied SDK (PC dependent)
Buffer size
(shared between active channels)
256 MS 512 MS 512 MS 1 GS 1 GS 2 GS
Buffer size (streaming mode) 100 MS in PicoScope software. Up to available PC memory when using SDK.
Maximum waveforms per second 29,000 wfm/s (PC dependent)
Max. buffer segments (using PicoScope 6) 10,000
Maximum buffer segments (using SDK) 250,000 500,000 500,000 1,000,000 1,000,000 2,000,000
Timebase ranges

1 ns/div to 5000 s/div
50 ps/div to 100 ns/div
Timebase accuracy ±2 ppm
Timebase ageing 1 ppm per year

** To achieve 2.5 GS/s sampling rate in 2-channel mode, use channel A or B and channel C or D.

Basic triggers Rising, falling
Advanced triggers Edge: single edge or dual edge; adjustable hysteresis
Pulse width: negative or positive pulse; wider or narrower than a specified width
Window: entering or leaving a voltage range
Window pulse width: signal is inside or outside a voltage range for a set time
Dropout: inactivity over a user–defined time interval
Window dropout: signal does not enter or exit a voltage range for at least a set time
Delay: nth event after trigger event, with optional delay
Interval: time between two edges is greater or less than a set time, or inside/outside a time range
Level: the signal remains on one side of a threshold voltage for a specified period of time
Logic level: arbitrary logic state of Channels A to D and AUX
Runt pulse: crosses one threshold but not the other
Trigger modes None, Single, Repeat, Auto, Rapid, ETS
Maximum trigger rate Up to 10,000 waveforms in a 10 ms burst
Trigger sources Channels A to D, AUX
Trigger level Adjustable over whole of selected voltage range
Trigger sensitivity 1 LSB accuracy up to full bandwidth of scope
Re–arm time Less than 1 µs on fastest timebase
Maximum trigger delay
pre–trigger capture
post–trigger delay

100% of capture duration
4 billion samples
Trigger timing resolution 1 sample period


Auxiliary trigger Input (AUX)
AUX trigger connector type Rear panel BNC, shared with reference clock input
Trigger types Edge, pulse width, dropout, interval, logic
Input characteristics 50 Ω ±1%, DC coupled
Bandwidth 25 MHz
Threshold range ±1 V
Overvoltage protection ±5 V (DC + AC peak)


Reference clock Input (SDK only)
Clock input characteristics 50 Ω, BNC, ±1 V, DC coupled
Frequency range 5, 10, 20, 25 MHz, user-selectable
Connector Rear panel BNC, shared with AUX trigger
Level Adjustable threshold, ±1 V
Overvoltage protection ±5 V


Function generator and Arbitrary Waveform Generator
Frequency range DC to 20 MHz
Standard waveforms
All models
D models

Sine, square, triangle, DC level
Sine, square, triangle, DC level, ramp (up/down), sin (x)/x, Gaussian, half–sine, white noise, PRBS
Output frequency accuracy Same as scope timebase accuracy
Output frequency resolution < 0.05 Hz
DC accuracy ±1% of full scale
Connector type Rear panel BNC
Overvoltage protection ±5 V
Sweep modes Up, down, or dual, with selectable start/stop frequencies and increments
Signal generator triggering Scope, manual, or AUX input; programmable number of cycles from 1 to 1 billion
Amplitude range ±250 mV to ±2 V
Offset adjustment ±1 V (maximum combined output ±2.5 V)
Output impedance 50 Ω
AWG buffer size n/a 64 kS n/a 64 kS n/a 64 kS
AWG sample rate n/a 200 MS/s n/a 200 MS/s n/a 200 MS/s
AWG Resolution n/a 12 bits n/a 12 bits n/a 12 bits


Probe Compensation Output
Signal output type 1 kHz square wave, 2 V pk–pk, 600 Ω


Spectrum Analyzer
Frequency range DC to 250 MHz DC to 350 MHz DC to 500 MHz
Display modes Magnitude, peak hold, average
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat–top
Number of FFT points From 128 to 1,048,576


PicoScope 6 PicoScope 6 is your complete test and measurement lab in one application. Features include:
Capture modes: oscilloscope, spectrum and persistence.
Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions.
Mask limiting testing: pass/fail, failure count, total count.
Serial Decoding: decode data from a serial bus such as I²C.
Automated measurements
Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate.
Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD).
Export data formats: comma separated values (CSV), tab delimited (TXT), Windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT).
Operating systems supported: Microsoft Windows XP (SP3) to Windows 8 (stable software), Linux and OS X for Mac (beta software).
Full details for PicoScope 6
Linux drivers Linux Software & Drivers for PicoScope 6400
Software development kit Includes drivers and example code for various programming languages including C, C#, Excel and LabVIEW. Download SDK


PC Requirements
Minimum Processor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT).
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 2.0 compliant port.
Recommended Processor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 850 MB, 64–bit: 2 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT).
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 3.0 compliant port.


Operating environment
Temperature  range

0 °C to 40 °C (20 °C to 30 °C for quoted accuracy)
5 to 80% RH, non–condensing
Storage environment
Temperature  range

-20 to +60 °C
5 to 95% RH, non–condensing


Physical Properties
Dimensions 255 x 170 x 40 mm
(approx 10 x 6.7 x 1.6 in)
280 x 170 x 40 mm
(approx 11 x 6.7 x 1.6 in)
Weight 1 kg
(approx 2 lb  3 oz)
1.3 kg
(approx 2 lb  14 oz)


Language Support
PicoScope 6

Full support for: English, Deutsch, Español, Français, Italiano
Menus and dialogs only for: 中文 (简体), 中文 (繁體), Čeština, Dansk, suomi, Ελληνικά, Magyar, 한국어, 日本語, Norsk, Polski, Português, română, Русский, Svenska, Türkçe
User’s guide
Programmer’s guide
Quick Start Guide

English, 中文 (简体), Deutsch, Español, Français, Italiano
English, Deutsch, Español, Français, Italiano


Data sheet English, 中文 (简体), Deutsch, Español, Français, Italiano
Additional hardware (supplied) Four factory–compensated oscilloscope probes, USB 3.0 cable, universal mains (AC) power supply, mains lead (power cord), carry case, user manuals and software CD–ROM
PC interface USB 3.0 (USB 2.0 compatible)
Power supply
AC adaptor
12 V @ 4 A
External adaptor supplied (suitable for USA, UK, Europe and Australasia)
Compliance European EMC and LVD standards
FCC Rules Part 15 Class A
RoHS compliant
Total Satisfaction Guarantee In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty 5 years

Note: quoted specifications apply when using PicoScope 6 software.

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Negativo           Positivo

this link open a new window

  • Visualizzazioni: 6272
  • Marca: Pico Technology
  • Codice Prodotto: 6403D
  • MPN: PP887
  • Disponibilità: 1 Settimana
  • Prezzo Netto:
  • 4.895,00€
  • Prezzo incl. 22% IVA: 5.971,90€

Tag: pico6000