AimTTi CPX200D DC Power Supply Dual Output 180W 60V 10A no interfaces
AimTTi CPX200D Bench/System DC Power Supply, PowerFlex Regulation, Smart Analog Controls Dual Output, 2 x 60V/10A 180W, No Interfaces
The CPX200D is the latest variant of the CPX series and replace the best-selling CPX200.
PowerFlex regulation enables the 360 watts of total power to be configured to suit each specific application.
The two 180 watt outputs can each supply up to 60 volts or up to 10 amps. See below for power curve.
Isolated tracking enables the outputs to be wired in series or parallel whilst controlled from a single voltage adjustment for up to 120 volts or 20 amps.
A new variant of the CPX series
The CPX200D replaces the best-selling CPX200, many thousands of which are in use across the world.
A wider PowerFlex range extends maximum voltage from 35 volts to 60 volts, whilst the maximum current of 10 amps is now available up to 16 volts rather than 12 volts.
It includes all of the features of the CPX400D, described earlier on page 2, but at a lower power level.
Existing CPX200 owners will appreciate the new features of S-Lock, Range Control, Voltage Tracking and Synchronous On/Off.
For those requiring bus control, the CPX200DP includes a full set of digital interfaces.
PowerFlex design gives variable voltage and current combinations within a maximum power envelope
Up to 60V and up to 10A per output (180W maximum)
Constant voltage or constant current operation
Low output noise and good transient response
PowerFlex or fixed-range operation plus custom limits
True analogue controls with digital settings locking
Independent outputs or isolated voltage tracking
Outputs can be wired in series or parallel for 120V or 20A
Variable OVP trips; safety binding-post terminals
4 digit fixed resolution meters; selectable remote sensing
Compact ½ rack 3U case for bench use or rack mounting
Duplicate terminals at rear on CPX200DP
GPIB, RS-232, USB and LAN interfaces with LXI
compliance (CPX200DP only)
AC Input: 110 to 240 volts ±10% 50/60Hz. Installation Category II.
Input Power: 500VA max.
Temperature & Environmental
Operating Range: +5ºC to +40ºC, 20% to 80% RH
Storage Range: -40ºC to + 70ºC
Environmental: Indoor use at altitudes up to 2000m, Pollution Degree 2.
Cooling: Rear discharge variable speed fan.
Safety & EMC
Safety: Complies with EN61010-1
EMC: Complies with EN61326
Size: 210 x 130 mm (½ rack 3U) x 377mm
(size excludes feet, knobs and terminals).
Weight: 5.0kg (11lb)
Spedizione e imballo impeccabile, sono molto soddisfatto anche dei prodotti che trattano, grazie Batter Fly
Lorenzo sopra 25/02/2020
Great service, once products had been shipped it took less than 24h to get them. Packaging was superb.. Original hakko iron and tips, I am very pleased with my purchase.
Ettore sopra 24/02/2020