Nel caso abbiate ricevuto una email relativa ad un vostro ordine passato ci scusiamo, si tratta di un errore generato da un nuovo componente. Ora è tutto risolto

TESTEC TT-SI 9002 oscilloscope active differential probe 25MHz 1400V

TESTEC TT-SI 9002 oscilloscope active differential probe 25MHz 1400V

TESTEC TT-SI 9002 oscilloscope active differential probe 25MHz 1400V

Includes:
- 4 x AA batteries
- TESTEC TT-SI GR1 Grabber Red and Black



Bandwidth: 25 MHz
Attenuation Ratio: x20 / x200
Accuracy: +/-2%
Rise Time: 14 ns
Input Impedance: 4 MΩ, 5,5 pF

Only connect to a grounded oscilloscope!

Input Voltage
Differential Mode
x20: +-140V (DC + peak AC) or 140Vrms
x200: +-1400V (DC +peak AC) or 1000Vrms

Common Mode
x20: +-1400V (DC + peak AC) or 1000Vrms
x200: +-1400V (DC +peak AC) or 1000Vrms

Absolute max. Voltage
x20: +-1400V (DC + peak AC) or 1000Vrms CAT III
x200: +-1400V (DC +peak AC) or 1000Vrms CAT III

Output Voltage
Swing: +-7V (into 2kΩ load)
Offset: <+-5mV
Noise (typical): 0,7mVrms
Source Impedance (typical): 1Ω @ 1kHz, 8Ω @ 1MHz
CMRR (typical): -80dB @ 50Hz, -60dB @ 20kHz

Power requirements: 4x AA Cells or Mains Adaptor 6VDC/60mA or regulated 9VDC/40mA
Dimensions (LxWxH): 170 mm x 63 mm x 21 mm
Length: BNC Cable 95 cm - Input Leads 45 cm
Weight: 400 g (Probe and PVC-Jacket)

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Male           Buono
  • Visualizzazioni: 6364
  • Marca: TESTEC
  • Codice Prodotto: 15102
  • MPN: 15102
  • Disponibilità: a magazzino
  • Prezzo Netto:
  • 278,25€
  • Prezzo incl. 22% IVA: 339,47€

Tag: testecseriesi

Testimonials

Envoi super rapide et bien emballé. Prix très attractif. Parfait.

Eric sopra 27/01/2021

Envoi rapide , Tarifs très correct. Fast shipping , and good prices. J'ai précédemment acheté un fer à souder , mais j'ai été étonné qu'il ne propose pas quelque consommable pour démarre...

Mathias sopra 25/01/2021