Categorie
Testimonials
Tutto OK!!
Giuseppe on 16/11/2017 5
Incredibly quick shipping, the Hakko soldering unit is a joy to work with.
Rasto on 13/11/2017 5
Pagamenti sicuri

PREZZI IVA ESCLUSA

CONSEGNA GRATUITA :

ITALIA SOPRA EURO 95

EUROPA SOPRA EURO 300

Carrello della spesa
Il tuo carrello della spesa è vuoto.













 

Nuova Pistola Dissaldante
HAKKO FR-300


PicoScope 4824 PC Oscilloscope 8 channels, 12-bit, 20 MHz no probes

PicoScope 4824 PC Oscilloscope 8 channels, 12-bit, 20 MHz no probes
Produttore: Pico Technology
Codice Prodotto: PP916
Disponibilità: In magazzino
Prezzo IVA esclusa: 1.955,00€
Qtà:  
   - O -   

PicoScope 4824 PC Oscilloscope 8 channels, 12-bit, 20 MHz no probes

Features
8 channels, high resolution, deep memory.
8 channels
12 bit resolution
20 MHz bandwidth
256 MS buffer memory
High-performance arbitrary waveform generator
SuperSpeed USB 3.0 interface
Split-screen waveform viewing
Low sine and pulse distortion
Advanced digital triggers
Serial bus decoding

Offering 8 channels and 12-bit resolution with one ADC per channel, the PicoScope 4824 delivers the functionality you need to make precision, time-correlated waveform measurements on multiple channels and a wide range of signal types.

Combining high resolution technology with 256 Msamples buffer memory, powerful debug tools and a built-in arbitrary waveform generator, the PicoScope 4824 is the ideal oscilloscope for precise measurements and rapid debug.  Tools such as Mask Limit Testing, Serial Bus Decoding, Advanced Digital Triggers and Persistence Mode help to track problems for rapid troubleshooting.  Waveforms are captured in high resolution, making it easy to distinguish signal from noise to ease debug and analysis.

Selection table:

Product Channels Bandwidth Sampling Rate Buffer Memory Resolution (Enhanced)
4224 2 20 MHz 80 MS/s 32 MS 12  (16 bits)
4224 Kit 2 20 MHz 80 MS/s 32 MS 12  (16 bits)
4224-IEPE 2 20 MHz 80 MS/s 32 MS 12  (16 bits)
4424 4 20 MHz 80 MS/s 32 MS 12  (16 bits)
4424 Kit 4 20 MHz 80 MS/s 32 MS 12  (16 bits)
4262 2 5 MHz 10 MS/s 16 MS 16  (20 bits)
4824 8 20 MHz 80 MS/s 256 MS 12  (16 bits)

 

PicoScope 4824 8 channel USB Oscilloscope Specifications

At a glance
Model Input channels Bandwidth
(−3 dB)
Maximum
sampling rate
Buffer memory Arbitrary
waveform generator
PicoScope 4824 8 20 MHz 80 MS/s 256 MS 80 MS/s

 

Oscilloscope — Vertical
Input channels 8
Connector type BNC, 20 mm spacing
Bandwidth (−3 dB) 20 MHz (50 mV to 50 V ranges)
10 MHz (10 mV and 20 mV ranges)
Rise time (calculated) 17.5 ns (50 mV to 50 V ranges)
35.0 ns (10 mV and 20 mV ranges)
Vertical resolution 12 bits
Software-enhanced vertical resolution Up to 16 bits
Input ranges ±10 mV to ±50 V full scale, in 12 ranges
Input sensitivity 2 mV/div to 10 V/div (10 vertical divisions)
Input coupling AC / DC
Input characteristics 1 MΩ ∥ 19 pF
DC accuracy ±1% of full scale ±300 μV
Analogue offset range
(vertical position adjustment)
±250 mV (10 mV to 500 mV ranges)
±2.5 V (1 V to 5 V ranges)
±25 V (10 V to 50 V ranges)
Overvoltage protection ±100 V (DC + AC peak)

 

Oscilloscope — Horizontal (timebase)
Maximum sampling rate (real-time) 80 MS/s (1 to 4 channels in use)
40 MS/s (5 to 8 channels in use)
Maximum sampling rate (USB streaming) 10 MS/s using PicoScope 6 software
80 MS/s per channel using supplied API. 160 MS/s total across all channels. (PC dependent)
Timebase ranges (real time) 20 ns/div to 5000 s/div
Buffer memory
(shared between active channels)
256 MS
Buffer memory (streaming mode) 100 MS in PicoScope software. Up to available PC memory when using supplied API
Waveform buffer 10,000 segments
Maximum waveforms per second 25,000 wfm/s (PC dependent)
Timebase accuracy ±20 ppm (+5 ppm/year)
Sample jitter 25 ps RMS typical

 

Dynamic performance (typical)
Crosstalk (full bandwidth) 20 000:1, DC to 20 MHz
Harmonic distortion < −60 dB, 10 mV range
< −70 dB, 20 mV and higher ranges
SFDR > 60 dB, 20 mV and 10 mV ranges
> 70 dB, 50 mV and higher ranges
Noise 45 μV RMS on 10 mV range
ADC ENOB 11.3 bits
Pulse response < 1% overshoot
Bandwidth flatness (at scope input) DC to full bandwidth (+0.2 dB, −3 dB)

 

Triggering
Source Channels A to H
Trigger modes None, auto, repeat, single, rapid (segmented memory)
Advanced trigger types Edge: rising, falling or either edge; adjustable hysteresis
Pulse width: negative or positive pulse; wider or narrower than a specified width, or inside/outside a range of widths
Window: entering or leaving a voltage range
Window pulse width: signal is inside or outside a voltage range for a set time
Dropout: inactivity over a user–defined time interval
Window dropout: signal does not enter or exit a voltage range for at least a set time
Interval: time between two edges is greater or less than a set time, or inside/outside a time range
Logic level: arbitrary logic state of up to four selected input channels
Runt pulse: crosses one threshold but not the other
Trigger sensitivity Digital triggering provides 1 LSB accuracy up to full bandwidth
Maximum pre-trigger capture Up to 100% of capture size
Maximum post-trigger delay Up to 4 billion samples
Trigger re-arm time < 3 μs on fastest timebase
Maximum trigger rate Up to 10 000 waveforms in a 30 ms burst
Advanced digital trigger levels All trigger levels, window levels and hysteresis values settable with 1 LSB resolution across input range
Advanced digital trigger time intervals All time intervals settable with 1 sample resolution from 1 sample (minimum 12.5 ns) up to 4 billion sample intervals

 

Function generator
Standard output signals Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine, white noise, PRBS
Standard signal frequency DC to 1 MHz
Sweep modes Up, down, dual with selectable start/stop frequencies and increments
Triggering Can trigger a counted number of waveform cycles or sweeps (up to 1 billion)
from the scope trigger or manually from software.
Output frequency accuracy ±20 ppm
Output frequency resolution < 20 mHz
Output voltage range ±2 V
Output voltage adjustments Signal amplitude and offset within ± 2V range. Adjustable in approx 300 μV steps.
Amplitude flatness < 0.5 dB to 1 MHz typical
DC accuracy ±1% of full scale
SFDR 87 dB typical
Output characteristics Rear panel BNC, 600 Ω output impedance
Overvoltage protection ±10 V

 

Arbitrary Waveform Generator
Update rate 80 MS/s
Buffer size 16 kS
Resolution 14 bits
Bandwidth 1 MHz
Rise time (10% to 90%) 150 ns

 

Spectrum analyser
Frequency range DC to 20 MHz
Display modes Magnitude, average, peak hold
Windowing functions Rectangular, Gaussian, triangular, Blackman,
Blackman-Harris, Hamming, Hann, flat-top
Number of FFT points Selectable from 128 up to 1 million in powers of 2

 

Math channels
Functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
Operands Input channels A to H, reference waveforms, time, π

 

Automatic measurements
Scope mode AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum mode Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average and standard deviation

 

Serial decoding
Protocols CAN, LIN, I2C, I2S, UART/RS-232, SPI, FlexRay

 

Mask limit testing
Statistics Statistics Pass/fail, failure count, total count

 

Software
PicoScope 6 PicoScope 6 is your complete test and measurement lab in one application. Features include:
Capture modes: oscilloscope, spectrum and persistence.
Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions.
Mask limiting testing: pass/fail, failure count, total count.
Serial Decoding: decode data from a serial bus such as I²C.
Automated measurements
Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate.
Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD).
Export data formats: comma separated values (CSV), tab delimited (TXT), Windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT).
Operating systems supported: Microsoft Windows XP (SP3) to Windows 8 (stable software), Linux and OS X for Mac (beta software).
Full details for PicoScope 6
Linux drivers Linux Software & Drivers for PicoScope 4824
Software development kit A growing collection of drivers and example code for various programming languages.

 

PC Requirements
Minimum Processor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT).
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 2.0 compliant port.
Recommended Processor: 1 GHz.
Memory: 512 MB.
Free disk space: 32–bit: 850 MB, 64–bit: 2 GB.
Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7 or Windows 8 (not Windows RT).
Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac).
Ports: USB 3.0 compliant port.

 

Environmental
Operating environment
Temperature  range
Humidity

0 °C to 45 °C (20 °C to 30 °C for quoted accuracy)
5 to 80% RH, non–condensing
Storage environment
Temperature  range
Humidity

-20 to +60 °C
5 to 95% RH, non–condensing

 

Physical Properties
Dimensions 190 x 170 x 40 mm
Weight < 0.55 kg

 

Language Support
Software
PicoScope 6

Full support for: English, Chinese (simplified), French, German, Italian, Spanish
UI only: Chinese (traditional), Czech, Danish, Dutch, Finnish, Greek, Hungarian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Swedish, Turkish
Documentation
User’s guide
Programmer’s guide
Quick Start Guide

English, Chinese (simplified), German, Spanish, French, Italian
English
English, German, Spanish, French, Italian
Data sheet English, Chinese (simplified), German, Spanish, French, Italian

 

General
What's in the box? USB 3.0 cable, user manuals, software CD–ROM and a double-headed USB 2.0 cable
PC connectivity SuperSpeed USB 3.0 (USB 1.1 and USB 2.0 compatible)
Power requirements Powered from single USB 3.0 port or two USB 2.0 ports
Compliance RoHS compliant, WEEE, and LVD compliant. Tested to meet EN61326-1:2006 and FCC Part 15 Subpart B.
Total Satisfaction Guarantee In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty 5 years

 

Scrivi una recensione

Il Tuo Nome:


La Tua Recensione: Nota: Il codice HTML non è tradotto!

Punteggio: Negativo            Positivo

Inserisci il codice nel box di seguito:



this link open a new window

Tags: pico4000,