Categorie
Testimonials
Gran bel prodotto, Siglent SDM3045X Digital multimeter! Grande professionalità da parte dello staff Batterfly! Grazie, alla prossima!
Daniel on 24/05/2018 5
Davvero molto professionali, massima cura per il cliente e merce introvabile in Italia a prezzi ottimo!
Marco Caps on 02/05/2018 5
Pagamenti sicuri

PREZZI IVA ESCLUSA

CONSEGNA GRATUITA :

ITALIA SOPRA EURO 95

EUROPA SOPRA EURO 300

Carrello della spesa
Il tuo carrello della spesa è vuoto.















 

Nuova Pistola Dissaldante
HAKKO FR-301


PicoScope 2207A PC Oscilloscope 2 channels with FG/AWG, 100MHz, Includes probes

PicoScope 2207A PC Oscilloscope 2 channels with FG/AWG, 100MHz, Includes probes
Produttore: Pico Technology
Codice Prodotto: PP909
Disponibilità: Fuori Produzione

PicoScope 2207A PC Oscilloscope 2 channels with FG/AWG, 100MHz, Includes probes

Like a benchtop oscilloscope, only smaller and better.
Up to 200 MHz bandwidth
1 GS/s sampling
Advanced digital triggers
Arbitrary waveform generator
Serial decoding
USB powered
Ultra compact design

Powerful, portable, and versatile
The PicoScope 2200A Series oscilloscopes offer a small, light, modern alternative to bulky benchtop devices. You can now fit a 200 MHz, 1 GS/s instrument easily in your laptop bag! They are perfect for engineers on the move; ideal for a wide range of applications including design, test, education, service, monitoring, fault finding, and repair.

A small form factor is not the only benefit of these PC-based scopes. With our PicoScope 6 software, high-end features such as serial decoding and mask limit testing are included as standard. New functionality is regularly delivered through free upgrades, optimized with the help of feedback.

Selection table:

Product Channels Bandwidth Sampling Rate Buffer Memory Resolution (Enhanced)
2104 1 10 MHz 50 MS/s 8 kS 8  (12 bits)
2105 1 25 MHz 100 MS/s 24 kS 8  (12 bits)
2204A 2 + AWG 10 MHz 100 MS/s 8 kS 8  (12 bits)
2204A-D2 2 + AWG 10 MHz 100 MS/s 8 kS 8  (12 bits)
2205A 2 + AWG 25 MHz 200 MS/s 16 kS 8  (12 bits)
2205A Kit 2 + AWG 25 MHz 200 MS/s 16 kS 8  (12 bits)
2206A 2 + AWG 50 MHz 500 MS/s 32 kS 8  (12 bits)
2207A 2 + AWG 100 MHz 1 GS/s 40 kS 8  (12 bits)
2208A 2 + AWG 200 MHz 1 GS/s 48 kS 8  (12 bits)
2205MSO 2+16 + AWG 25 MHz 200 MS/s 48 kS 8  (12 bits)
2205MSO Kit 2 +16+ AWG 25 MHz 200 MS/s 48 kS 8  (12 bits)

 


PicoScope 2204 to 2208 Specifications

Oscilloscope — Vertical
Model PicoScope 2204A PicoScope 2205A PicoScope 2206A PicoScope 2207A PicoScope 2208A
Bandwidth 10 MHz 25 MHz 50 MHz 100 MHz 200 MHz
Rise time (calculated) 35 ns 14 ns 7 ns 3.5 ns 1.75 ns
Input channels 2
Vertical resolution 8 bits
Enhanced vertical resolution Up to 12 bits
Input ranges ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
Input sensitivity 10 mV/div to 4 V/div (10 vertical divisions)
Input coupling Software selectable AC/DC
Input characteristics BNC, 1 MΩ ∥ 14 pF BNC, 1 MΩ ∥ 13 pF
Analog offset range
(vertical position adjustment)
none ±250 mV (50 mV to 200 mV ranges)
±2.5 V (500 mV to 2 V ranges)
±20 V (5 V to 20 V ranges)
DC accuracy ±3% of full scale
Overvoltage protection ±100 V (DC+AC peak)

 

Oscilloscope — Horizontal
Maximum sampling rate
1 channel
2 channel

100 MS/s
50 MS/s

200 MS/s (ChA)
100 MS/s

500 MS/s
250 MS/s

1 GS/s
500 MS/s

1 GS/s
500 MS/s
Equivalent sampling rate (ETS) 2 GS/s 4 GS/s 5 GS/s 10 GS/s 10 GS/s
Maximum sampling rate
(continuous streaming mode)
1 MS/s 9.6 MS/s
Timebase ranges 10 ns to 5000 s/div 5 ns to 5000 s/div 2 ns to 5000 s/div 1 ns to 5000 s/div 500 ps to 5000 s/div
Buffer memory 8 kS 16 kS 32 kS 40 kS 48 kS
Buffer memory (streaming mode) 2 MS per channel in PicoScope software. 100 MS (shared) in PicoScope software.
Waveform buffer
normal triggering
rapid block triggering

Up to 10,000 waveforms
not applicable

Up to 10,000 waveforms
Up to 32 waveforms
Maximum waveforms per second
2204, 2205
2206, 2207, 2208

710 wfm/s (PC dependent)
1,500 wfm/s (PC dependent)
Timebase accuracy ±100 ppm ±50 ppm
Sample jitter < 30 ps RMS < 5 ps RMS

# Buffer memory is shared between active channels.
 

Dynamic Performance (typical)
Crosstalk (full bandwidth) Better than 200:1 (equal ranges) Better than 400:1 (equal ranges)
Harmonic distortion < -50 dB at 100 kHz, full–scale input
SFDR > 52 dB at 100 kHz, full–scale input
Noise < 150 μV RMS (±50 mV range) < 200 μV RMS (±50 mV range)
Bandwidth flatness (at scope input) (+0.3 dB, -3 dB) from DC to full bandwidth

 

Triggering
Sources Ch A, Ch B
Trigger modes None, auto, repeat, single None, auto, repeat, single, rapid (segmented memory)
Advanced triggers Edge, window, pulse width, window pulse width, dropout, window dropout, interval, logic.
Trigger types, ETS Rising or falling edge
Trigger sensitivity Digital triggering provides 1 LSB accuracy up to full bandwidth. In ETS mode, typical 10 mV p-p at full bandwidth
Maximum pre–trigger capture 100% of capture size
Maximum post–trigger delay 4 billion samples
Trigger re–arm time PC–dependent < 2 µs on fastest timebase
Maximum trigger rate PC–dependent Up to 32 waveforms in a 64 μs burst

 

Function Generator
Standard output signals Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine
Pseudorandom output signals None White noise, PRBS
Standard signal frequency DC to 100 kHz DC to 1 MHz
Sweep modes Up, down, dual with selectable start/stop frequencies and increments
Output frequency accuracy ±100 ppm ±50 ppm
Output frequency resolution < 0.01 Hz
Output voltage range ±2 V
Output adjustments Any amplitude and offset within ±2 V range
Amplitude flatness (typical) < 1 dB to 100 kHz < 0.5 dB to 1 MHz
DC accuracy ±1% of full scale
SFDR > 55 dB @ 1 kHz full–scale sine wave > 60 dB @ 10 kHz full–scale sine wave
Connector type Front panel BNC with 600 Ω output impedance
Overvoltage protection ±10 V

 

Arbitrary Waveform Generator
Update rate 2 MS/s 20 MS/s
Buffer size 4 kS 8 kS
Resolution 12 bits
Bandwidth >100 kHz >1 MHz
Rise time (10% to 90%) < 2 µs < 120 ns

 

Spectrum Analyser
Frequency range DC to 10 MHz DC to 25 MHz DC to 50 MHz DC to 100 MHz DC to 200 MHz
Display modes Magnitude, peak hold, average
Window types Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat–top
Number of FFT points Selectable from 128 to half the available buffer memory in powers of 2

 

Math Channels
Functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, freq, derivative, integral, min, max, average, peak, delay
Operands A, B (input channels), T (time), reference waveforms, constants, Pi

 

Automatic measurements
Scope mode AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum mode Frequency at peak, amplitude at peak, average amplitude at peak,
total power, THD %, THD dB, THD plus noise, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average and standard deviation

 

Serial decoding
Protocols CAN, LIN, I²C, UART/RS-232, SPI, I²S, FlexRay

 

Mask limit testing
Statistics Pass/fail, failure count, total count

 

Display
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, custom, or none

 

General
PC connectivity USB 2.0 (USB 1.1 and 3.0 compatible). USB cable included.
Power requirements Powered from USB port
Dimensions (including connectors) 142 x 92 x 19 mm
Weight < 0.2 kg (7 oz)
Temperature range Operating: 0 °C to 50 °C (20 °C to 30 °C for stated accuracy). Storage: –20 °C to +60 °C.
Humidity range Operating: 5% to 80% RH non-condensing. Storage: 5% to 95% RH non-condensing.
Safety approvals Designed to EN 61010-1:2010
Compliance RoHS, WEEE, and LVD compliant. Tested to meet EN61326-1:2006 and FCC Part 15 Subpart B.
Software included PicoScope 6, Windows and Linux SDK, example programs (C, Visual Basic, Excel VBA, LabVIEW)
PicoScope software PC requirements Microsoft Windows XP (SP3), Windows Vista, Windows 7 or Windows 8 (not Windows RT). 32- or 64-bit. Beta versions for Linux and OS X (Mac)
Languages (manual) Chinese (simplified), English, French, German, Italian, Spanish
Languages (software interface) Chinese (simplified & traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hungarian,
Italian, Japanese, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Turkish

 

Scrivi una recensione

Il Tuo Nome:


La Tua Recensione: Nota: Il codice HTML non è tradotto!

Punteggio: Negativo            Positivo

Inserisci il codice nel box di seguito:



this link open a new window