The moment we have ALL been waiting for is finally here! We are happy to introduce the all-new KEYSIGHT InfiniiVision HD3 Series oscilloscopes
The brand-new HD3 brings KEYSIGHT's industry-leading capabilities from high-performance scopes to the high-volume level from 200 MHz to 1 GHz. Leveraging hardware technology from the UXR Series, the HD3 Series boasts the most impressive resolution on the market with 4x the vertical accuracy and up to 10x less noise than the competition. Paired with the fast, uncompromised waveform update rate and 25x more memory than the current InfiniiVision scopes, the HD3 Series is truly set apart from other oscilloscopes in this class.
The InfiniiVision HD3 Series oscilloscopes with bandwidth models ranging from 200 MHz up to 1 GHz offer high-end technology in a small form factor. With an intuitive touch user-interface, industry-leading waveform update rate and zone trigger, you can capture elusive glitches and anomalies not possible on other oscilloscopes.
Highlights
Separate Signal from Noise
KEYSIGHT pushes measurements to the limit in every class of scope. Perform digital debugging using a portable oscilloscope with a custom ASIC that delivers 4x more vertical resolution and half the noise floor of other oscilloscopes. Troubleshoot your design and ensure product quality by debugging with an oscilloscope that can see the small signals beyond the noise to catch the slightest and most infrequent signal glitches.
Increase vertical resolution by 4x with the 14-bit ADC
See smaller signals with a 50 μVRMS noise floor, the lowest in its class
Identify infrequent signal glitches with an uncompromised 1.3 million waveforms per second update rate for all measurements, enabled by a custom ASIC
Capture and analyze more signals at once with 100 Mpts of deep memory
Automate measurements with the industry's largest selection of serial bus protocols and application software
Access a wide variety of specialized probes for quick and precise measurement accuracy
De-risk your project with three years of warranty and KeysightCare Technical Support, providing unlimited access to expertise and committed response times
A key component in achieving high vertical accuracy is the ADC. A higher number of ADC bits means more vertical resolution, translating to more accurate signal representation.
For example, an oscilloscope with a 12-bit ADC can encode an analog input into 4,096 unique levels of conversion (212 = 4,096). Each additional bit doubles the number of levels of conversion. Oscilloscopes with a 14-bit ADC can encode the analog input into 16,384 levels (214 = 16,384), which is four times the resolution of oscilloscopes with a 12-bit ADC and 64 times the resolution of an 8-bit ADC.
Capture smaller signals with a 50 µVRMS noise floor
All electronic devices, including oscilloscopes, generate some level of noise. However, the goal is to minimize the noise as much as possible. A lower noise floor means that the oscilloscope has less impact on the signal, resulting in more accurate measurements.
The Keysight InfiniiVision HD3 sets a new benchmark in noise floor performance with a 50 µVRMS noise floor at full 1 GHz bandwidth. You can further reduce the noise with bandwidth limiting and waveform averaging options on the HD3.
Advanced analysis
Automate complex measurements with advanced software capabilities:
Convert time-domain signals into frequency-domain signals using a fast Fourier transform (FFT).
Compare signals to pre-defined templates for quick pass / fail analysis with mask testing.
Analyze the statistical distribution of jitter and noise with waveform and measurement histograms.
Perform frequency response analysis with Bode plots.
Isolate signals in seconds with zone touch triggering - simply draw a box with your finger on the screen.
Characterize signals, hunt for errors, and save them automatically with Fault Hunter.
7-in-1 instrument
More than an oscilloscope, the HD3 helps you save valuable bench space, providing more capabilities in the same footprint by enabling additional instrument integration:
Oscilloscope with two or four analog channels
Mixed-signal oscilloscope to add 16 digital channels
Protocol analyzer
Frequency response analyzer
100-MHz arbitrary waveform generator
Three-digit digital voltmeter
Eight-digit counter with totalizer
Probes for every application
Start today with the probes that come standard with the HD3 oscilloscope:
Discover the Keysight N2843A passive probe that offers 500 MHz bandwidth, a 10:1 attenuation ratio, and a high input resistance of 10 MΩ (standard one per channel).
Explore the mixed-signal oscilloscope (MSO) capability that comes standard on the HD3. If you already use one of Keysight's 16-digital channel MSO cables, simply plug it in.
Need additional functionality? Keysight offers a broad range of voltage, current, and optical probing solutions for oscilloscopes.
Do More with Application Software
Protect your investment with upgradability at any time for features like bandwidth up to 1 GHz, 100 Mpts of memory, and application-specific oscilloscope software. Decode serial buses faster with InfiniiVision's hardware- based decoding and broad range of supported serial buses.
Leave a Comment