AimTTi QPX600DP DC Power Supply Dual Output 600W 80V 50A with USB, RS232, LAN (GPIB optional)
AIM-TTI QPX600DP Bench/System DC Power Supply Dual Outputs, 2 x 80V/50A 600W, USB/RS232/LAN Interfaces (Optional GPIB with the use of GPIB-1A accessory)
AIM-TTI QPX series main features:
- Single or dual outputs, 1200 watts total
- PowerFlex design gives variable voltage/current combinations within a power envelope
- Up to 60 volts or 80 volts and up to 50 amps
- Setting by direct numeric entry or by spin wheel
- High setting resolution of 1mV in up to 60 volts
- Low noise of < 3mV rms at full power
- Bench or rack mounting, front and rear terminals
- Quasi analogue remote control
- RS232, USB and LAN interfaces (P models)
PowerFlex and PowerFlex+ Autoranging
Most laboratory power supplies (PSUs) offer a fixed maximum voltage and maximum current capability. Thus, for example, a 35V/20A PSU can supply up to 700 watts, but its power capability falls in direct proportion to the output voltage so that when being used at 12V, for example, the maximum power has reduced to 240W. The TTi PowerFlex system uses a modified form of mixed-mode regulation to provide higher levels of current when the voltage is set to lower values. PowerFlex supplies have an auto-ranging or semi constant power characteristic so that the current capability rises as the voltage falls and offer a near constant power output over a limited range. Thus, for example, the QPX1200 can provide up to 60V or up to 50A within a total power limit of 1200W. This means that the maximum voltage and the maximum current are not available simultaneously and care must be taken when interpreting the specifications. Although producing slightly higher noise levels than the standard mixed-mode regulation, performance is still excellent. Both the CPX and QPX series use PowerFlex with linear post regulation to provide wider output voltage and current capabilities with low noise.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
