The DAQ-9600 data acquisition system has five high-quality modules and a built-in 6.5 digit multimeter to provide you with an efficient and accurate data acquisition.
The system measures and converts 14 different input signals:
Temperature with thermocouples, RTDs and thermistors; DC/AC voltage; 2-wire and 4-wire resistance; frequency and period; DC/AC current and capacitance; direct strain and bridge strain.
Your data acquisition is controlled by logging and observing results in a variety of display options for easier analysis. A free DAQ software assists you in controlling measurement channels for your specific test configurations from multiple data acquisition units.
× ![]()
6.5 digits Accuracy
3-slot Mainframe
Mainframe features:
- Large 4.3” TFT color display
- 3-slot mainframe with built-in 6.5 digits DMM
- Basic 0.0035% DCV accuracy
- 5 selectable switch modules
- Up to 450 channels/s scan rate
- Up to 100 kilo points internal memory
- Measures and converts 14 different input signals:
Temperature with thermocouple, RTDs and thermistor; dc/ac volts; 2- and 4-wire resistance; frequency and period; dc/ac current and capacitance; direct strain and bridge strain
- Commands compatible with KEYSIGHT DAQ970A
- USB storage supports copy/log data in standalone operation
- Standard interfaces: Digit I/O, LAN and USB host/device
- Optional interface: Micro GPIB (model DAQ-9600 with GPIB)
- Free PC software DAQ-Data logger, allows easy configuration and control of tests
Modules features:
DAQ-900
20-Channel Universal Multiplexer (Solid State Relay)
- Scanning speed up to 450 channels per second
- 2-wire and 4-wire scanning
- Built-in temperature cold junction reference
- 120 V switching
DAQ-900 is a solid state relay module that provides two groups (A/B) of 10 2-wire channels each. All 20 channels are switchable to high (HI) and low (LO) inputs, providing fully isolated inputs for the built-in digital meter or external instruments. During 4-wire resistance measurements, the channels of group A are automatically paired with the channels of group B to provide power and sense connections. The module has a built-in cold junction reference, which can greatly reduce errors caused by thermal gradients when measuring thermocouples.
DAQ-901
20+2 Channels Universal Multiplexer (Armature Relay)
- The scanning speed can reach 80 channels per second
- 2-wire and 4-wire scanning
- Built-in temperature cold junction reference
- 300 V switching
- The extra 2 channels can directly measure the current (1A/each channel)
DAQ-901 is a comprehensive multiplexer for general scanning. The same module can mix 2-wire and 4-wire channels; at the same time, the additional 2 current input channels can be used for AC and DC current measurement without external shunt resistors (maximum 1A per channel).
DAQ-901, a total of 22 channels, intensive multifunction switching and a scan rate of up to 80 channels per second, is suitable for various data acquisition applications.
DAQ-903
40-Channel Single-Ended Multiplexer
- The scanning speed can reach 80 channels per second
- Single-wire switching is suitable for common-low applications
- 2-wire scanning (except current)
DAQ-903 can switch 40 single-wire inputs per module. It can be used for common-low applications such as battery testing, component characterization and desktop testing. The low-voltage connection is isolated from ground and can be floated up to 300 V.
DAQ-903 also supports all 2-wire internal measurements except current.
DAQ-904
4 x 8 2-Wire Matrix
- The switching speed 3ms
- 32 2-wire intersections
- 300 V, 1A switching
- Up to 96 crosspoints (3 slots)
DAQ-904 module can provide the most flexible connection path between your DUT and the test system, allowing different test instruments to be connected to multiple points on the DUT at the same time.
DAQ-904 can connect the rows and columns of multiple modules to build larger matrices, such as 8 x 8, 4 x 16, and so on. Up to 96 crosspoints can be built in a single instrument.
DAQ-909
8+2 Channels High Voltage High Current Multiplexer
- The scanning speed reaches 60 channels per second
- DC voltage 600V, current 2A
- 2-wire and 4-wire scanning
- Additional 2 channels can directly measure current (2A/each channel)
DAQ-909 is a multiplexer specially designed for high voltage, providing 8 channels for DC 600V / AC 400Vrms voltage measurement. The additional 2 current input channels can be used for AC and DC current measurement, external shunt resistors are not required (maximum 2A / per channel).
Leave a Comment