SAKER XFVP10-2 Fiber Optic Isolated Voltage Probe, 110MHz, cable up to 12m
SAKER XFVP Isolated voltage probe allows the safe and accurate measurement of floating voltages in power electronic modules or electronics. Although it is best suited for medium voltage equipment due to the isolation provided, the high common mode and EMI rejection make it a perfect choice for general low voltage measurements. The 25V input voltage range with the supplied x10 attenuator is ideal to measure gate voltage in various semiconductor switching devices and study potential problems and improvements. Also input capacitance has been kept to a minimum as this is what really hurts most high-frequency measurements, causing loading of high and medium impedance signal sources and signal degradation.
A calibrate function brings the zero automatically to its position and calibrates the gain of the probe, all this without the need to disconnect the input signal as compared to other probes. A remote standby function allows to safely reduce the power consumption and extend battery life of both probe head and receiver without accessing potentially hazardous areas. The output signal is provided via a BNC connector which allows the use of any 50Ohm input terminated scope.
The probe head is small enough to be used inside cabinets and small modules. It also features a camera mount type tripod thread that allows easy placement and clearances from the probe to ground to be maintained.
What's in the box:
1 x XFVP probe 110MHz, with 0.5m output BNC cable, SMB unterminated cable, x10 attenuator, 2 x AA batteries, tripod, quick guide, case, USB cable. Fiber cable 2m in length available up to 12m.
| XFVP | XFVP-L | |
| Type of probe | Split Probe | Split Probe |
| Bandwidth | 220MHz and 110MHz models | 220MHz and 110MHz models |
| Input range | 2.5V, up to 2500V with external attenuators | 2.5V, up to 2500V with external attenuators |
| Max. common mode | 50kV | 50kV |
| Remote power-off of probe head | Yes | No |
| Fiber cable length | 2m, up to 12m | 2m, up to 25m |
| Offset adjustment | Fine auto adjustment | Fine auto adjustment (with no signal at input) |
| Gain adjustment | Auto adjustment | Manual adjustment |
| Input connector | Touch protected SMB | Touch protected SMB |
| Output | Coaxial cable, BNC 50Ohm | Coaxial cable, BNC 50Ohm |
| Tripod mount | Yes | Yes |
| Power | Receiver USB powered, Transmitter uses AA batteries | Receiver USB powered, Transmitter uses AA batteries |
| Tripod included | Yes | Yes |
| External attenuator included | Yes, one to choose (x2, x10 or x50) | Yes, one to choose (x2, x10 or x50) |
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email info@batterfly.com
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
