-
Votre panier est vide!
TekBox designs and produces instruments and accessories to perform pre-compliance EMI and EMC measurements.
You can download the complete catalog in PDF format, second edition (October 2023) at this LINK.
TekBox TBAS1 RF attenuator set contains the following items: 3dB RF attenuator, N connector, 3..
TekBox TBAS3 RF attenuator set consists of a 3dB, 6dB, 10dB and 20dB attenuator in a beech woo..
The TekBox TBBNC1 BNC accessory set contains 4 pieces BNC to 4mm Banana adapters, 2 pieces BNC to te..
TekBox TBCAS1 Coaxial adapter set, contains 44 pieces of the most common 50 Ohm coaxial adapters in ..
TekBox TBCG1-25MHz is a radiating comb generator with an internal antenna and a base frequency of 25..
TekBox TBCG2 is a passive, step recovery diode based comb generator/frequency multiplier. It is opti..
TekBox TBCP1-200 is a fixed aperture RF current monitoring probe.The probe has a 3dB bandwidth of ap..
TekBox TBCP1-250 is a fixed aperture RF current monitoring probe.The probe has a very flat response ..
TekBox TBCP1-500 is a fixed aperture RF current monitoring probe.The probe has a very flat response ..
The TekBox TBCP1-CAL is a calibration fixture corresponding with the TBCP1 RF current monitoring pro..
The TekBox TBCP2-250 is a snap-on RF current monitoring probe. It has a very flat response with a 3d..
The TekBox TBCP2-30K400 is a snap-on RF current monitoring probe. The probe has a very flat response..
The TekBox TBCP2-500 is a snap-on RF current monitoring probe. It has a very flat response with a 3d..
The TekBox TBCP2-750 is a snap-on RF current monitoring probe. It has a very flat response with a 3d..
The TekBox TBCP2-CAL is a calibration fixture corresponding with the TBCP2 RF current monitoring pro..
The TekBox TBCP3-1000 is a fixed aperture RF current monitoring probe. It has a very flat response w..
The TekBox TBCP3-CAL is a calibration fixture corresponding with the TBCP3 RF current monitoring pro..
The TekBox TBCP4-250 is a fixed aperture RF current monitoring probe, it has a very flat response wi..
The TekBox TBCP4-500 is a fixed aperture RF current monitoring probe, it has a very flat response wi..
The TekBox TBCP4-750 is a fixed aperture RF current monitoring probe, it has a very flat response wi..
The TekBox TBCP4-CAL is a calibration fixture corresponding with the TBCP4 RF current monitoring pro..
TekBox TBDA1/14 is a wideband driver amplifier with 14 dB gain.Features: 5.5V Maximum supply voltag..
TekBox TBDA1/28 is a wideband driver amplifier with 28 dB gain.Features: 5.5V Maximum supply voltag..
TekBox TBFL1 is a combined transient limiter / attenuator / high pass filter, designed to provide op..
Many EMC pre-compliance test set ups require a ground plane. Not every lab has the necessary space f..
TekBox TBHDR1 is a high dynamic range amplifier with a frequency range from 30kHz to 1.5GHz. Its gai..
TEKBOX TBJT01 is a compact injection transformer for control loop stability measurements in power el..
TekBox TBL5016-3-EU 50μH LISN with Schuko socket (CE7/3, 16A), 100 cm coaxial cable BNC-male / N- ma..
TekBox TBLM1 LISN Mate is a companion device for LISNs, which splits the conducted noise signal into..
TekBox TBLPA1 linear wideband power amplifier is a general purpose RF amplifier for test and measure..
TekBox TBMA1 is a small, lightweight, wideband biconical measurement antenna. With its moderate pric..
TekBox TBMA2 is a biconical measurement antenna for EMC radiated emission testing and generating def..