GW Instek GSP-8000 Series Spectrum Analyzers Introduction

Posted by Batter Fly 20.02.2024 0 Comment(s) 2349 Testy i Pomiary,

The GSP-8000 series, brand new general spectrum analyzers from GW Instek, features three frequency ranges, namely 8.0GHz, 3.8GHz and 1.8GHz. The series is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. The series provides 1Hz ~ 1MHz resolution bandwidth (RBW), 10Hz ~ 3MHz video bandwidth (VBW), -104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of -160dBm/Hz (typical).

GW Instek GSP-8800 8GHz Spectrum Analyzer

GW Instek GSP-8000 Series Spectrum Analyzer

GW Instek GSP-8380 3.8GHz Spectrum Analyzer

GW Instek GSP-8180 1.8GHz Spectrum Analyzer

❮ ❯

CHECK ALL MODELS OF THE GSP-8000 SERIES

Features:

Frequency range:
- GSP-8180: 9kHz ~ 1.8GHz
- GSP-8380: 9kHz ~ 3.8GHz
- GSP-8800: 9kHz ~ 8GHz
RBW: 1Hz ~ 1MHz in 1-3-5-10 steps
VBW: 10Hz ~ 3MHz in 1-3-5-10 steps
Phase Noise: -104 dBc/Hz
Sensitivity: -160dBm/Hz Typical @PreAmp On
Built-in AM/FM Demodulation
Built-in Time Spec Function
Measurement Function: ACPR/OCBW/CHPW, NdB BW, Pass-Fail, Freq. Counter, Noise Marker
Built-in 20dB Preamplifier
Communication Interface: LAN, USB Host/Device
Display: 10.4" XGA Output (1024 x 768 pixels)
Options: Tracking Generator, EMI Filter

Applications:

Checking and Analysis of Spectrum Characteristics
Monitor the Signal Uploaded by SNG Vehicle
Analyze AM and FM Signal Characteristics
For a Compact RF Test System
Measuring the Frequency Response of RF Components
Cables, Attenuators, Filters and Amplifiers...etc

With respect to measurement applications, GSP-8000 has built-in Time Spec function, AM/FM signal demodulation function, channel test (Channel Power Measurement) function, Pass-Mail function, etc. The Time Spec function can simultaneously observe and display the correlation between power, frequency and time. ACPR/OCBW/CHPW tests can be used to test adjacent channels, power occupation bandwidth ratio, and channel power. The Pass-Fail function can be used to determine whether the signal is within the set range. Users can use these functions to conduct a wide range of measurement applications.

GW Instek GSP-8000 utilizes a 10.4" TFT LCD large-size screen with XGA (1024 x 768 pixels) resolution to allow an easy observation of test signals. For communication interface, GSP-8000 provides two interfaces: USB and LAN. Through the USB Host, users can quickly retrieve the files stored after measurements, while USB Device and LAN interface allow users to control the instrument through dedicated PC software, or use the corresponding command set to design the required program.

GW Instek GSP-8000 also provides two options, namely TG and EMI Filter. The Tracking Generator function must be purchased when placing an order. Other options can be activated through the corresponding software authorization (Soft-Key), which greatly improves usage efficiency.

Model	GSP-8180 (TG)	GSP-8380 (TG)	GSP-8800	GSP-8800 (TG)
Frequency Range	from 9 kHz to 1.8 GHz	from 9 kHz to 3.8 GHz	from 9 kHz to 8 GHz
Tracking Generator Option	Standard	Standard	Optional	Standard
EMI Option	Optional (model GSP-8180E1)	Optional (model GSP-8380E1)	Optional (model GSP-8800E1)

REQUEST INFORMATIONS