Desco 19656 Dual Operator Monitor, with Universal Power Adapter
Features:
- Dual Operator Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators and one ESD worksurface - Wave Distortion Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor - IMPROVED Operator Alarm
Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor’s jack is intermittent - NEW Park Delay Timer
Indicates the 8 second delay to disconnect and park the operator wrist cord - NEW Visual Status Display
Displays the operators’ and worksurface status: illuminates red when intermittent or failed connection occurs - NEW Mat Monitor Switch
Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface - NEW Audible Alarm Adjustment
Sets the audible alarm volume from loud to louder - Wave Distortion Technology
Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor - Park Snap
Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm - Single-wire Impedance Design
Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0 - 1.2 Volt Operator Test Voltage
Reduces the risk of electrical overstress (EOS) for the handling of sensitive components - <50 Millisecond Alarm Response Time
Identifies failures and intermittencies - Calibration Verification
Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations - NIST Calibrated with Certificate Included
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration. - 100-240VAC Safety Certified Power Adapter with IEC C14 Style Inlet
Connects to a power cord with an IEC C13 outlet connector. See items 200225 and 200220. - Made in the United States of America
*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing per ANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
