TekBox TBRE101 30 Hz – 100 KHz RE101 Loop Antenna
The TBRE101 is a passive receiving loop antenna used in MIL-STD-461G RE101 testing to measure radiated emissions from electronic equipment and subsystems, including electrical cable interfaces for defense applications.
The TBRE101 is used to measure low frequency magnetic field emissions 7cm from all sides of the DUT. The test covers the frequency range of 30 Hz to 100 kHz. Section 5.17 of the MIL-STD-461G specifies the test setup and measurement procedure.
The TBRE101 consists of a 13.3 cm diameter coil with 36 turns of 7 strand 41 AWG Litz wire inside a shield. The DC resistance of the loop winding is 10 ohms. The loop receives magnetic field radiation normal to the contained plane and creates a voltage signal proportional to the intensity of the B-field/H-field radiation at the loop’s output port.
A TekBox TBCCP1-2K70 coaxial RF current monitoring probe (transducer) with a flat transfer impedance of 0 dBΩ (1V/A) from 9 kHz to 30 MHz when loaded with 50Ω is an optional accessory for calibration purposes.
Specifications
- Antenna Type: Receiving Loop
- Frequency range: 30 Hz–100 kHz (usable frequency range: 10 Hz-1 MHz)
- Standards: MIL-STD-461G / RE101
- Loop Diameter: 13.3 cm
- Loop construction: 36 turns of 7 strand 41 AWG Litz wire
- DC resistance of the loop coil: 10 Ω (Nominal)
- Self inductance of the loop coil: 385 µH
- Output connector: N-female, 50 Ω
- Antenna conversion factor: Within ±3 dB compared to the theoretical validation factor for standard RE101 loop in MIL-STD-461G
- Mechanical Dimensions: L x W x H: 10.62 cm x 15.2 cm x 19.1 cm (4.18” x 5.98” x 7.52”)
- Weight: 0.5 kg (1.1 lbs)
Optional Accessories
| Part Number | Description |
|---|---|
| TBRS101-TX | Radiating loop for generating magnetic fields in the range of 30 Hz to 100 kHz |
| TBCCP1-2K70 | Coaxial RF current monitoring probe for measuring the injected current into the radiating loop |
| TBMR-110M | Measurement receiver, 1 Hz – 110 MHz, CISPR 16 and MIL-STD-461 |
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
