Elektro Automatik EA-ELR 9500-90 10.5kW 500V electronic load with energy recovery
Discontinued model, click here to view the new series
Elektro Automatik EA-ELR 9500-90 programmable electronic DC loads with energy recovery. Adjustable from: 0-10.5kW , 0-500V , 0-90A , 0.14-160Ω. It has an efficiency of 94.50% and an approximate weight of 31 kg (68.3 lb).
Elektro Automatik ELR 9000 Main Specifications:
- For 208 V (±10%) or 230 V AC supply
- Energy recovery of the supplied DC energy into the local grid
- Galvanically isolated DC input
- Input power ratings: up to 9.3 kW per unit, expandable to 297 kW
- Input voltages: up to 1500 V
- Input currents: up to 510 A per unit
- FPGA based digital control
- Multilingual TFT touch panel
- User profiles, true function generator
- Galvanically isolated analog and USB interface
- Extra USB port on the front for USB stick
- Optional, digital, plug & play interfaces or alternatively installed GPIB port
- SCPI command set and ModBus support
General
Series EA-ELR 9000 offers electronic DC loads with energy recovery, along with a good selection of voltage, current and power ratings for a multi- tude of applications. These devices incorporate the four common regulation modes constant voltage (CV), constant current (CC), constant power (CP) and constant resistance (CR). The FPGA based control circuit provides additional features, such as a function generator and a table based regulation circuit for the simulation of non-linear internal resistances.
The energy recovery function converts the supplied DC energy into a synchronous sine current and feeds it back into the local grid, eliminating the usual heat dissipation to a minimum and saving energy costs at the same time. The large color TFT touch panel offers a different and intuitive kind of manual operation, compared to electronic load series of other manufacturers.
Response times for the control via analog or digital interfaces have been improved by the FPGA controlled hardware.
In parallel operation of multiple devices, a master-slave bus is used to connect the units to a bigger system where the actual values are totaled and the set values distributed.
Power ratings, voltages, currents
The available voltage range portfolio goes from models with 0...80 V DC up to models with 0...1500 V DC. Input currents up to 510 A with only one unit are available. The series offers three power classes with 3.1 kW, 6.2 kW or 9.3 kW (US models for 208 V) respectively 3.5 kW, 7 kW or 10.5 kW (EU models for 230 V) in only 3U for single devices, which can be extended up to 297 kW in cabinets for a significantly high total current.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
The 'Extended Warranty', 'Instrument Protection Plan' and 'Instrument Loaner Plan' service options are only applicable to the EA-10000 and EA-20000 series.
Extended Warranty
- 3 years: 3% surcharge
- 5 years: 5% surcharge
Instrument Protection Plan
- 3 years: 8% surcharge
- 5 years: 11% surcharge
Instrument Loaner Plan
- 3 years: 14% surcharge
- 5 years: 20% surcharge
The prices for the Service Options are calculated as a percentage of the list price of the product for which the Service Option is applied.
For more detailed information about each option and the specific services covered, please refer to the link provided below.
