Micsig RCP12000XS AC Current Probe 12000Apk, 30MHz max.
Micsig RCP12000XS is an AC current probe with a maximum peak current of 12000A, a maximum frequency of 30MHz, 0.5mV/A (2000X), and 1.6mm.
Main features:
- Bandwidth: 2Hz - 30MHz
- Coil cross-section (diameter): 1.6mm
- Accuracy (typical): 2%
- Peak current: 12000Apk
The Micsig RCP series Rogowski current probe measures AC currents up to 12000Apk, with a maximum bandwidth up to 30MHz. The withstand voltage is up to 1kVrms, and the insertion impedance is nearly zero, greatly minimizing interference to the device under test (DUT).
The thin and flexible 1.6mm Rogowski coil allows users to easily pass between the terminals of semiconductor devices such as TO-220. With a typical accuracy of 2%, it accurately measures high-frequency and high-current signals, such as double-pulse dynamic tests, monitoring the switching current of semiconductors.
BNC Interface
Standard BNC interface for use with any oscilloscope, with a compact and flexible design that easily solves problems in hard-to-reach areas. The coil diameter can be customized to meet additional testing requirements.
Smaller coil section
The diameter of the coil cross-section is only 1.6mm, allowing engineers to measure current in the hardest-to-reach parts of the circuit, such as chips with tight pin spacing, like TO-220 and TO-47.
Measurement of MOSFET Id current
The RCP has excellent high-frequency measurement capabilities, easily handling high-speed signals and rapidly changing current waveforms, helping to observe high-frequency harmonic components during the measurement of MOSFET Id current (as shown in the oscillation section).
Applications:
- Current measurement in motors and especially power quality measurements in VSD, UPS, or SMPS circuits
- Double pulse testing for measuring pin currents of MOSFET and IGBT chips made from materials such as SiC and GaN
- Load current and higher harmonic current measurement in power electronics
- Measurement of high-frequency, pulsed, or transient sinusoidal currents
- Measurement of AC currents in a three-phase power system
- Power consumption measurement in semiconductors
- Measurement of mains frequency current at 50/60Hz
- Development and diagnosis of power converters
| Model | RCP60XS | RCP120XS | RCP300XS | RCP600XS | RCP1200XS | RCP3000XS | RCP6000XS | RCP12000XS |
| Bandwidth | 85Hz - 30MHz | 34Hz - 30MHz | 10Hz - 30MHz | 10Hz - 30MHz | 12Hz - 30MHz | 3Hz - 30MHz | 2Hz - 30MHz | 2Hz - 30MHz |
| Peak current | 60Apk | 120Apk | 300Apk | 600Apk | 1200Apk | 3000Apk | 6000Apk | 12000Apk |
| Output sensitivity | 100mV/A (10X) | 50mV/A (20X) | 20mV/A (50X) | 10mV/A (100X) | 5mV/A (200X) | 2mV/A (500X) | 1mV/A (1000X) | 0.5mV/A (2000X) |
| Peak di/dt | 4kA/μs | 8kA/μs | 20kA/μs | 40kA/μs | 70kA/μs | 70kA/μs | 70kA/μs | 70kA/μs |
| Droop (%/ms) | 65%/ms | 35%/ms | 9%/ms | 6%/ms | 3%/ms | 2%/ms | 2%/ms | 2%/ms |
| Output noise | < 20mVpp | < 20mVpp | < 18mVpp | < 12mVpp | < 5mVpp | < 5mVpp | < 5mVpp | < 6mVpp |
| Coil peak isolation voltage | AC 1kVrms (1min) (50Hz/60Hz) (Rogowski coil only) | |||||||
| Coil cross-section diameter | 1.6 mm | |||||||
| Output impedance | 1MΩ | |||||||
| Interface | Universal BNC | |||||||
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
