AimTTi I-prober 520 positional current iprobe
AimTTi I-prober 520 positional current probe, PCB track Touch & Measure
Features:
- Unique technology enabling current measurement in PCB tracks
- Bandwidth of DC to 5MHz, dynamic range of 10mA to 20A pk-pk
- Useable with any normal oscilloscope, safety rated to 300V Cat II
- Investigates waveforms in any conductor including ground planes
A technology breakthrough
The I-prober 520 achieves something radically new.
It can observe and measure currents in PCB tracks and other conductors where conventional current probes can’t be used. This includes captive wires into components, the legs of integrated circuits, and PCB ground planes.
Conventionally, current can only be measured by either breaking the circuit to insert a shunt resistor, or by surrounding the conductor by a loop of magnetic material as in a standard current probe.
The I-prober 520 enables currents, from dc up to 5MHz, to be observed and measured simply by placing its insulated tip onto the conductor.
Key Features
- Current measurement from insulated probing of conductor
- Suitable for observation and measurement of current in PCB tracks, component leads and ground planes
- Wide dynamic range of 10mA to 20A peak to peak
- Wide bandwidth of DC to 5MHz
- Low noise figure equivalent to <6mA rms at full bandwidth
- Safety rated to 300V Cat II (600V Cat I)
- Suitable for connection to any oscilloscope
- High accuracy general purpose H-field probe
- Converts to standard ‘closed magnetic circuit’ current probe
Unique Capabilities
- No requirement to break or surround the conductor
- Observe and measure currents in PCB tracks directly
- Minimal disturbance to circuit conditions through very low insertion impedance and stray capacitance
- Useable in confined and difficult to access spaces
- Measures current into surface mount components, IC legs and short component leads
- Can observe currents flowing within ground planes
- Useable on high voltage conductors and in high temperature areas
What's In The Box
- Current probe with fixed cable to control box.
- Control box/calibrator with fixed output cable with BNC plug.
- Clip-on toroid assembly.
- Universal power supply including interchangeable plugs for UK, Europe, USA and Australia.
- Printed Instruction Manual (multi language).
- Laminated card showing calibration graph.
- Fitted case as shown
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
-5%
