Pico P2036 300MHz, 10:1 Passive Probe
Pico Technology P2036 is a passive oscilloscope probe with 300 MHz bandwidth, 2.5 mm probe tip diameter, 10:1 attenuation, BNC connector, single pack.
The P2036 (single pack) is a state-of-the-art 10:1 miniature probes for oscilloscopes with up to 300 MHz bandwidth. The entire probe core is made of a high-quality CeramCore ceramic hybrid. Pure coaxial design and laser-trimmed resistors ensure highest signal fidelity along the signal path, offering high bandwidth and fast risetimes for accurate impulse measurements. With a maximum input voltage of 300 V CAT II, these probes are equally suitable in service and development environments. The read-out BNC connector is automatically recognized as a 10:1 divider by scopes such as the PicoScope 6000E Series that feature a sense ring.
The P2036 probe is available as a single-pack with a full set of accessories, and also as a cost saving dual-pack with a reduced set of accessories. This P2036 single-pack probe is supplied with the following accessories and spares:
1 x Coding rings (set) 3x4 colors
1 x Ground blade 2.5 mm
1 x Ground lead 15 cm
1 x Ground spring 2.5 mm
1 x Insulating cap 2.5 mm
1 x Sprung hook 2.5 mm
1 x Trim tool
The compact design with its 2.5 mm housing diameter at the tip provides better visibility on the DUT (device under test) in dense SMT circuits than conventional 5 mm housings.
The remarkably low input capacitance of only 9.5 pF applies a minimal load to the signal source, which is particularly important when measuring signals with fast risetimes. Only active or low-impedance probes can achieve lower loading than this.
The long ground leads found on most conventional probes bring additional inductance and resonances into the setup, which will result in false or inaccurate readings. The P2036 and P2056 are available with an IC contact system consisting of five different IC adaptors ranging from 1.27 to 0.5 mm pitch and a PCB adaptor kit, offering an ideal solution for short-circuit-proof, reproducible measurements. The probe is shipped with our signature spring-loaded tips. There are up to 16 different accessories included with the probe, offering adaptive solutions for almost every probing demand.
| P2036 probe specifications | |
| Attenuation | 10:1 |
| Resistance at probe tip | 10 MΩ |
| Capacitance at probe tip | 9.5 pF |
| Scope input impedance | 1 MΩ |
| Compatibility | PicoScope 6000E Series 300 MHz oscilloscopes |
| Bandwidth (3 dB) | DC to 300 MHz |
| Maximum working voltage | 300 V RMS CAT II |
| Risetime (10% to 90%) | 1 ns |
| Compensation range | 10 to 25 pF |
| Safety standard | IEC/EN 61010-031 |
| Cable length | 1.3 m (approx. 4 ft 3 in) |
| Weight | 48 g |
| Cable length | 1.3 m |
| Probe tip diameter | 2.5 mm |
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
