TekBox TBGP Roll Up Ground Plane (250x140cm)
Many EMC pre-compliance test set ups require a ground plane. Not every lab has the necessary space for permanent installation of a sheet metal ground plane. This is where the TekBox TBGP-250/140 “roll up” ground plane comes handy. The ground plane can be rolled up after use and stored inside its cardboard tube in a corner of the lab. The ground plane is composed from a conductive fabric bonded to a fleece.
TekBox TBGP-250/140 SPECIFICATIONS:
- Fabric dimensions: 250 cm x 140 cm
- Fabric thickness: 0.7 mm
- Fabric weight: 1.1 kg
- Fabric material: Polyester 45% + Silver 55% conductive fabric, fleece
- Contact block dimensions: 95 mm x 40 mm x 8 mm
- Contact block weight: 0.23 kg
- Contact block material: nickel plated
The ground plane can be used in full size, partially un-rolled, or easily cut to size by the user according to his requirements.
TekBox suggests two methods of contacting the ground plane:
Contact blocks:
TekBox provides 4 pieces nickel plated brass contact blocks together with the ground plane. Each block is equipped with three M5 threaded holes.
Each block has a weight of approximately a quarter kg. The blocks are placed on top of the ground plane and establish a good electrical contact, due to its weight and surface area. This method is very versatile, as the blocks can be placed and removed easily anywhere on the ground plane surface. The threaded hole spacing is matched with the dimensions of the ground brackets of most TekBox LISNs.
Textile rivets:
Alternatively or besides using contact blocks, the user can punch holes for standard male textile rivets according to his requirements anywhere into the fabrics. Female textile rivets can be used to clamp ground straps.
The photo below shows an example, using rivets from a low cost textile riveting set along with a woven ground strap. The ground strap is clamped in between the two halves of the female rivet.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
