-
U heeft nog geen producten in uw winkelwagen.
TekBox designs and produces instruments and accessories to perform pre-compliance EMI and EMC measurements.
You can download the complete catalog in PDF format, second edition (October 2023) at this LINK.
The TBCS101-DA is a differential amplifier with a flat response from DC – 250 MHz, a 3 dB bandwidth ..
The TBCS101-TGA is a DC-coupled amplifier with a flat gain from DC – 20 MHz, a 3 dB bandwidth of 40 ..
TekBox TBEMCL1-CAL is an EM-clamp calibration fixture built in accordance with the specifications of..
TekBox TBESDT1 ESD-Target is a current sensing transducer to verify ESD-Simulators. It is used to ta..
TekBox TBESDT2 ESD-Target is a current sensing transducer to verify ESD-Simulators. It is used to ta..
TekBox TBGTC1 open GTEM-cell adds to our existing portfolio of low-cost open TEM-cells for EMC pre-c..
The TBHPF1-150kHz B is a 150 kHz High Pass Filter for protection of spectrum analyzer or EMI-receive..
TekBox TBHPF1-150KHZ 150 kHz Highpass Filter for protection of spectrum analyzer or EMI-receiver RF ..
The TekBox TBHPF1-500kHz is a high-performance high-pass filter specifically designed for FCC compli..
The TBHPF1-9kHz B is a 9 kHz High Pass Filter for protection of spectrum analyzer or EMI-receiver RF..
TekBox TBHPF1-9kHz 9 kHz Highpass Filter for protection of spectrum analyzer or EMI-receiver RF inpu..
TekBox TBISN-T4 is an Impedance Stabilization Network (ISN) designed for conducted emissions measure..
TEKBOX TBJT02 is a wideband injection transformer for control loop stability analysis where accurate..
TEKBOX TBJT03 is a compact injection transformer for conducted immunity testing on signal and commun..
TekBox TBL00705-2 is a two-paths 50 Ω // 0.7µH LISN characterized from 10Hz - 200 MHz. I..
TekBox TBL0110-2 is a two path 50 Ω // 1 µH LISN characterized from 30Hz - 500 MHz. It is base..
TekBox TBL0225-2 LISN is a two-paths 50 Ω // 2 µH LISN characterized from 10Hz - 200 MHz. It is base..
TekBox TBL0510-1 is a 5 µH Line Impedance Stabilization Network (LISN) designed for conducted emissi..
TekBox TBL05100-1-10uF External 10uF Capacitor for TBL05100-1 LISN 50/60Hz..
TekBox TBL05100-1C is a universal 5 µH single-path Line Impedance Stabilization Network (LISN) desig..
TekBox TBL05100-1C-CAL is a hardware calibration kit specifically designed for the TekBox TBL05100-1..
TekBox TBL0550-1-10uF-50/60/400Hz 10µF capacitor Module for TBL0550-1 source 250V/50/60/400Hz..
TekBox TBL0550-1-10uF-50/60Hz 10µF capacitor Module for TBL0550-1, source 250V/50/60Hz..
The TekBox TBL0550-1B is a 5 µH single-path Line Impedance Stabilization Network (LISN) specifically..
The TekBox TBL0550-1B-CAL is a hardware calibration kit specifically designed for the TekBox TBL0550..
The TBL5008-2B is a Line Impedance Stabilization Network (LISN) designed to measure conducted emissi..
The TBL5008-2C is a Line Impedance Stabilization Network (LISN) designed to measure conducted emissi..
TekBox TBL50100-1B is a single path 50µH (+5 Ω) // 50 Ω LISN for conducted emission measurements of ..
The TekBox TBL501000-1 is a 50 µH single-path Line Impedance Stabilization Network (LISN) specifical..
The TBL5016-2B is a Line Impedance Stabilization Network (LISN) designed to measure conducted emissi..