New products introduced in September 2023

Posted by Batter Fly 30.09.2023 0 Comment(s) 1787

Bundle of options for SDS2000X Plus, SIGLENT SDS2XP-BND

Bundle of options for SDS2000X HD, SIGLENT SDS2XHD-BND

Bundle of options for SDS5000X, SIGLENT SDS5X-LA-BND

Bundle of options for SDS6000A, SIGLENT SDS6A-LA-BND

7.6m Extended Test Lead Set for Fluke 1550C Series, Fluke TL1550EXT

Chanalyzer 6 - for one seat per one year, Metageek SUB-000032

WiPry Clarity Spectrum Analyzer by Oscium with Wi-Fi 6/6E Support, Metageek KIT-000009

High Voltage Differential Probes, Micsig MDP Series

6-Channel Particle Counter Extech VPC260

FieldFox RF Handheld Analyzers KEYSIGHT N99xxC Series

PathWave BenchVue Data Acquisition Software KEYSIGHT BV0006B

EMI Test Receiver 5kHz to 30MHz compliant to CISPR 16-1-1 Rohde & Schwarz EPL1000

Microwave Signal Generators SIGLENT SSG6000A series

Data Acquisition System GW Instek DAQ-9600

Modules for DAQ-9600 Data Acquisition System, GW Instek DAQ-900 Series

12-bit, 4 Channels High-resolution Digital Oscilloscopes, RIGOL DHO900 Series

12-bit, 4/2 Channels High-resolution Digital Oscilloscopes, RIGOL DHO800 Series

12-bit, 4/2 Channels High-resolution Digital Oscilloscopes, RIGOL DHO1000 Series

High Current Bias-Tee TekBox TBBT01

GTEM Cell TekBox TBGTC1

Comb Generators TekBox TBCG3-RN2 and TBCG3-RN6

PC-software for EMC pre-compliance testing, TekBox EMCview Pro

ESD Target TekBox TBESDT1

Infrared Camera with 160x120px IR Resolution and Ignite Cloud, FLIR E5 Pro

Infrared Camera with 240x180px IR Resolution and Ignite Cloud, FLIR E6 Pro

Infrared Camera with 320x240px IR Resolution and Ignite Cloud, FLIR E8 Pro

Compact XY-Travel Stand, Table-Top, Inspectis HD-380

Compact XY-Travel Stand, In-Line, Inspectis HD-370

4K Digital Inverted Microscope for Weld Analysis and Measurement, Inspectis HD-250

FHD Digital Inverted Microscope for Weld Bead Inspection and Measurements, Inspectis HD-240

Periodic inspection for HAKKO desoldering tool

For using a desoldering tool in good condition, it is recommended to conduct a daily check after every use and a periodic inspection depending on the ...

Daily check for HAKKO desoldering tool

For using a desoldering tool in good condition, it is recommended to conduct a daily check after every use and a periodic inspection depending on the ...

FLIR Ex Pro Series Introduction

The new FLIR Ex Pro series thermal cameras are an essential companion for a wide range of industries, thanks to their ability to detect and display te...

Metageek Chanalyzer 6 Introduction

MetaGeek has introduced Chanalyzer 6, a rebranded version of their Tonic tool, which offers superior channel analysis compared to its predecessor, Cha...

FLIR Si Application Spotlight: Condition Monitoring in the Tire Industry

PUMPING UP EFFICIENCY IN TIRE MANUFACTURING: ACOUSTIC IMAGING CAMERAS FOR COMPRESSED AIR LEAKS. CHALLENGE: Tire manufacturing is a complex and intrica...

KEYSIGHT DAQ970 Series Bundles

KEYSIGHT has designed good, better, and best value bundles for the DAQ970 series. The multiplexer and switching bundles enable you to lower the cost o...

Rohde Schwarz EPL1000 Emi Test Receiver Introduction

Rohde & Schwarz launches new EMI test receiver for emission measurements up to 30 MHz. Rohde & Schwarz EPL1000 is a compact, complete and CISPR 16-1-...

SIGLENT SSG6000A Microwave Signal Generator Introduction

Satellite communication, radar and the latest mobile communication system work at frequency bands in the microwave range. In order to develop, test an...

GW Instek DAQ-9600 Data Acquisition System Introduction

The DAQ-9600 data acquisition system has five high-quality modules and a built-in 6.5 digit multimeter to provide you with an efficient and accurate d...

RIGOL DHO900 and DHO800 12-bit Digital Oscilloscopes Introduction

RIGOL introduces the all-new ultra-portable 12-bit digital oscilloscopes DHO900 and DHO800 series, with a USB-C interface, up to 250MHz and 4 channels...