GW Instek GSP-8380 (TG) 3.8GHz Spectrum Analyzer with Tracking Generator
GW Instek GSP-8380 (TG) is a spectrum analyzer with a frequency range from 9kHz to 3.8GHz and Tracking Generator option included.
Included accessories:
Power Cord x 1, Safety Guide x 1, USB Cable x 1
GW Instek GSP-8380 Features:
- Frequency Range: 9kHz ~ 3.8GHz
- RBW: 1Hz ~ 1MHz in 1-3-5-10 steps
- VBW: 10Hz ~ 3MHz in 1-3-5-10 steps
- Phase Noise: -104 dBc/Hz
- Sensitivity: -160dBm/Hz Typical @PreAmp On
- Built-in AM/FM Demodulation
- Built-in Time Spec Function
- Measurement Function: ACPR/OCBW/CHPW, NdB BW, Pass-Fail, Freq. Counter, Noise Marker
- Built-in 20dB Preamplifier
- Communication Interface: LAN, USB Host/Device
- Display: 10.4" XGA Output (1024 x 768 pixels)
- Options: Tracking Generator, EMI Filter
Applications:
- Checking and Analysis of Spectrum Characteristics
- Monitor the Signal Uploaded by SNG Vehicle
- Analyze AM and FM Signal Characteristics
- For a Compact RF Test System
- Measuring the Frequency Response of RF Components
- Cables, Attenuators, Filters and Amplifiers...etc
| Model | GSP-8180 (TG) | GSP-8380 (TG) | GSP-8800 | GSP-8800 (TG) |
| Frequency Range | from 9 kHz to 1.8 GHz | from 9 kHz to 3.8 GHz | from 9 kHz to 8 GHz | |
| Tracking Generator Option | Standard | Standard | Optional | Standard |
| EMI Option | Optional (model GSP-8180E1) | Optional (model GSP-8380E1) | Optional (model GSP-8800E1) | |
The GSP-8000 series, brand new general spectrum analyzers from GW Instek, features three frequency ranges, namely 8.0GHz, 3.8GHz and 1.8GHz. The series is suitable for teaching research, R&D verification, and the test requirements of radio frequency products during production and development stages. The series provides 1Hz ~ 1MHz resolution bandwidth (RBW), 10Hz ~ 3MHz video bandwidth (VBW), - 104dBc/Hz phase noise, a 20dB preamplifier, and the lowest noise floor of - 160dBm/Hz (typical).
With respect to measurement applications, GSP-8000 has built-in Time Spec function, AM/FM signal demodulation function, channel test (Channel Power Measurement) function, Pass-Mail function, etc. The Time Spec function can simultaneously observe and display the correlation between power, frequency and time. ACPR/OCBW/CHPW tests can be used to test adjacent channels, power occupation bandwidth ratio, and channel power. The Pass-Fail function can be used to determine whether the signal is within the set range. Users can use these functions to conduct a wide range of measurement applications.
GSP-8000 utilizes a 10.4" TFT LCD large-size screen with XGA (1024 x 768 pixels) resolution to allow an easy observation of test signals. For communication interface, GSP-8000 provides two interfaces: USB and LAN. Through the USB Host, users can quickly retrieve the files stored after measurements, while USB Device and LAN interface allow users to control the instrument through dedicated PC software, or use the corresponding command set to design the required program.
GSP-8000 also provides two options, namely TG and EMI Filter. The Tracking Generator function must be purchased when placing an order. Other options can be activated through the corresponding software authorization (Soft-Key), which greatly improves usage efficiency.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
