Fluke 789/E Multimeter 1000V AC/DC, 440mA, with Process Calibrator 0..20mA, 24V, HART
Fluke 789/E is a ProcessMeter with a voltage range of 1000 V AC/DC, 440 mA, process calibrator from 0 to 20 mA, 24V and HART.
Key features:
- Compact digital multimeter and mA loop calibrator solution
- Full-featured mA loop calibrator with built-in 24v Loop Power
- Quickly and easily troubleshoot every part of a control loop
- Large, bright dual-measurement display
What's in the box:
(1 set) AC175 Alligator clips
(1 set) TL71 Test lead set
4 x AA 1.5V Alkaline batteries (installed)
1 x Quick reference guide
1 x Safety information card
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART resistor eliminates the need to carry a separate resistor.
The 789 also has a built-in 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can also add the wireless data logging capabilities of the Fluke Connect mobile app to log data wirelessly to your smart phone and review it from a remote location.
* Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
| Model | 787B | 789 |
| DMM and Loop Calibrator in one tool | ✔ | ✔ |
| Precision 1000 V, True RMS Digital Multimeter | ✔ | ✔ |
| DC current source and Loop Calibrator | ✔ | ✔ |
| 24 V Loop power supply | - | ✔ |
| Min/Max / Average / Hold / Relative Modes | ✔ | ✔ |
| Diode Test and Continuity Beeper | ✔ | ✔ |
| Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp | ✔ | ✔ |
| Simultaneous mA and % of scale read-out | ✔ | ✔ |
| Externally accessible battery | ✔ | ✔ |
| Externally accessible fuses | - | ✔ |
| HART mode setting with loop power and a built-in 250 Ω resistor | - | ✔ |
| 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check | - | ✔ |
| Infrared I/O serial port | - | ✔ |
| Fluke Connect enabled | ✔ | ✔ |
Do a lot more while carrying a lot less
The 789 provides all standard DMM capabilities including frequency measurement to 20 kHz, Min/Max/Average/Hold/Relative modes, and diode test and continuity beeper. Combine that with the ability to troubleshoot every part of the loop.
Measure, source, simulate 4-20 mA signals, measure resistance, measure power, provide power to the loop and provide 250-ohm resistance to the loop. The 789 includes SpanCheck; 0% and 100% buttons to toggle between 4 and 20 mA sourcing, while the display can simultaneously show mA and % of scale readings for faster troubleshooting. It also delivers 1200-ohm drive capability on mA source.
Accuracy
This ProcessMeter offers manual step, 100%, 25%, Coarse, Fine, plus auto step and auto ramp. It also delivers 0.1% DC voltage accuracy and 0.05% DC current accuracy.
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
