RIGOL DSA832E-TG Analizzatore di Spettro 9kHz 3,2GHz con Tracking Generator

RIGOL DSA832E-TG Analizzatore di Spettro 9kHz 3,2GHz con Tracking Generator

RIGOL DSA832E-TG is the high performance compact size and light weight Spectrum Analyzer. The frequency range is from 9kHz to 3.2GHz and provides tracking generator function.The digital IF technology guarantees its reliability and performance to meet the most demanding RF applications.

Key Features
- All-DigitalIFTechnology
- Frequency Range from 9 kHz to 3.2 GHz
- Min. -148 dBm Displayed Average Noise Level (Typ.)
- Min. <-90 dBc/Hz @ 10 kHz Offset Phase Noise
- Level Measurement Uncertainty <1.0 dB
- 10 Hz Minimum Resolution Bandwidth
- Up to 3.2 GHz Tracking Generator
- Standard Preamplifier
- Advanced Measurement Functions (Opt.)
- EMI Filter & Quasi-Peak Detector Kit (Opt.)
- VSWR Measurement Kit (Opt.)
- PC Software (Opt.)
- Optional RF TX/RX Training Kit
- Optional RF Accessories (Cable, Adaptor, Attenuator, Bridge ...)
- Complete Connectivity: LAN (LXI), USB Host & Device, GPIB (Opt.)
- 8 Inch WVGA (800×480) Display
- Compact Size, Light Weight Design

Benefits of Rigol's all digital IF design
The ability to measure smaller signals: on the basis of this technology, the IF filter enables smaller bandwidth settings, which greatly reduce the displayed average noise level.
The ability to distinguish between small signals by frequency: using the IF filter with the smallest bandwidth setting, it is possible to make out signals with a frequency difference of only 10 Hz.
High precision amplitude readings: this technology almost eliminates the errors generated by filter switching,
reference level uncertainty, scale distortion, as well as errors produced in the process of switching between logarithmic and linear display of amplitude when using a traditional analog IF design.
Higher reliability: compared with traditional analog designs, the digital IF greatly reduces the complexity of the hardware, the system instability caused by channel aging, and the temperature sensitivity that can contribute to parts failure.
High measurement speed: the use of digital IF technology improves the bandwidth precision and selectivity of the filter, minimizing the scanning time and improving the speed of the measurement.


Specifications are valid under the following conditions: the instrument is within the calibration period, is stored for at least two hours at 0°C
to 50 °C temperature, and is warmed up for 40 minutes. Unless otherwise noted, the specifications in this manual include the measurement
Typical (typ.): characteristic performance, which 80 percent of the measurement results will meet at room temperature (approximately 25°C ).
This data is not warranted and does not include the measurement uncertainty.
Nominal (nom.): the expected mean or average performance or a designed attribute (such as the 50O connector). This data is not warranted
and is measured at room temperature (approximately 25°C ).
Measured (meas.): an attribute measured during the design phase which can be compared to the expected performance, such as the
amplitude drift variation with time. This data is not warranted and is measured at room temperature (approximately 25°C ).
NOTE: All charts in this manual are the measurement results of multiple instruments at room temperature unless otherwise noted. The
specifications (except the TG specifications) listed in this manual are those when the tracking generator is off.
Frequency range 9 kHz to 3.2 GHz
Frequency resolution 1 Hz
Internal Reference Frequency
Reference frequency 10 MHz
Accuracy ±[ (time since last calibration × aging rate) + temperature stability + calibration accuracy]
Initial calibration accuracy <1 ppm
Temperature stability 0°C to 50°C , reference to 25°C
<1 ppm
Aging rate <2 ppm/year
Frequency Readout Accuracy
Marker resolution span/ (number of sweep points - 1)
Marker uncertainty ±(frequency indication × reference frequency accuracy + 1% × span + 10% × resolution bandwidth +
marker resolution)
Frequency Counter
Resolution 1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz
Uncertainty ±(frequency indication × reference frequency accuracy + counter resolution)
Frequency Span
Range 0 Hz, 100 Hz to maximum frequency of instrument
Uncertainty ±span/ (number of sweep points - 1)
SSB Phase Noise
  20°C to 30°C , f c = 1 GHz
Carrier offset 10 kHz offset <-90 dBc/Hz
Residual FM
  20°C to 30°C , RBW = VBW = 1 kHz
Residual FM <20 Hz (nom.)
  Set "Auto SWT" to "Accy"
Resolution bandwidth (-3 dB) 10 Hz to 1 MHz, in 1-3-10 sequence
RBW uncertainty <5% (nom.)
Resolution filter shape factor (60 dB : 3 dB <5 (nom.)
Video bandwidth (-3 dB) 1 Hz to 3 MHz, in 1-3-10 sequence
Resolution bandwidth (-6 dB) (EMI-DSA800 option) 200 Hz, 9 kHz, 120 kHz
Measurement Range
Range fc = 10 MHz
DANL to +20 dBm
Maximum Input Level
DC voltage 50 V
CW RF power attenuation = 30 dB
+20 dBm (100 mW)
Max. damage level [1] +30 dBm (1 W)
NOTE: [1] When f c = 10 MHz, input level > +25 dBm and PA is Off, the protection switch will be on.
Displayed Average Noise Level (DANL)
  attenuation = 0 dB, RBW = VBW = 10 Hz, sample detector, trace average = 50,
tracking generator off, 20°C to 30°C , input impendence = 50 Ω
PA off 9 kHz to 100 kHz <-110 dBm (typ.)
100 kHz to 5 MHz <-122 dBm, <-125 dBm (typ.)
5 MHz to 3.2 GHz <-127 dBm, <-130 dBm (typ.)
PA on 100 kHz to 1 MHz <-142 dBm (typ.)
1 MHz to 5 MHz <-140 dBm, <-143 dBm (typ.)
5 MHz to 3.2 GHz <-145 dBm, <-148 dBm (typ.)
Level Display
Logarithmic level axis 1 dB to 200 dB
Linear level axis 0 to reference level
Number of display points 601
Number of traces 3 + math trace
Trace detectors normal, positive-peak, negative-peak, sample, RMS, voltage average
quasi-peak (with EMI-DSA800 option)
Trace functions clear write, max hold, min hold, average, view, blank
Units of level axis dBm, dBmV, dBµV, nV, µV, mV, V, nW, µW, mW, W
Frequency Response
  f c = 100 kHz, attenuation = 10 dB, relative to 50 MHz, 20°C to 30°C
PA off 100 kHz to 3.2 GHz <0.7 dB
  f c = 1MHz, attenuation = 10 dB, relative to 50 MHz, 20°C to 30°C
PA on 100 kHz to 3.2 GHz <1.0 dB
Input Attenuation Switching Uncertainty
Setting range 0 dB to 30 dB, in 1 dB step
Switching uncertainty f c = 50 MHz, relative to 10 dB, 20°C to 30°C
<0.3 dB
Absolute Amplitude Uncertainty
Uncertainty f c = 50 MHz, peak detector, preamplifier off, attenuation = 10 dB, input signal level = -10dBm, 20°C to 30°C
<0.3 dB
RBW Switching Uncertainty
Uncertainty relative to 1 kHz RBW
<0.1 dB
Reference Level
Range -100 dBm to +20 dBm, in 1 dB step
Resolution log scale 0.01 dB
linear scale 4 digits
  PA-DSA832 (option)
Gain 100 kHz to 3.2 GHz 17 dB (nom.)
Level Measurement Uncertainty
  95% confidence level, S/N > 20 dB, RBW = VBW = 1 kHz, preamplifier off, attenuation = 10 dB, -50 dBm <
input level = 0 dBm, f c > 10 MHz, 20°C to 30°C
Level measurement
<1.0 dB (nom.)
  attenuation = 10 dB
VSWR 300 kHz to 3.2 GHz <1.5 (nom.)
Second Harmonic Intercept
Second harmonic intercept
f c = 50 MHz, input signal level = -20 dBm, attenuation = 10 dB
+40 dBm
Third-order Intercept
Third-order intercept
f c = 50 MHz, two -20 dBm tones at input mixer spaced by 200 kHz, attenuation = 10 dB
+7 dBm
1dB Gain Compression
1dB compression of input
mixer (P 1dB )
f c = 50 MHz, attenuation = 0 dB
>0 dBm
Spurious Response
Spurious response, inherent input terminated 50 Ω, attenuation = 0 dB, 20°C to 30°C
<-90 dBm [2] , <-100 dBm (typ.)
Intermediate frequency <-60 dBc
System related sidebands referenced to local oscillators, referenced to A/D conversion, referenced to subharmonic of first LO,
referenced to harmonic of first LO
<-60 dBc
Input related spurious mixer level = -30dBm
<-60 dBc
NOTE: [2] Except the internal local oscillator (1820 MHz) and its harmonics.
Sweep time span = 100 Hz 1 ms to 3200 s
zero span 20 µs to 3200 s
Sweep time uncertainty span = 100 Hz 5% (nom.)
zero span (sweep time setting
value > 1 ms)
5% (nom.)
Sweep mode continuous, single
Tracking Generator (Option)
TG Output
Frequency range 100 kHz to 3.2 GHz
Output level range -40 dBm to 0 dBm
Output level resolution 1 dB
Output flatness relative to 50 MHz
±3 dB (nom.)
Trigger source Trigger source
External trigger level External trigger level
Input /Output
Front Panel Connectors
RF input impedance 50 Ω (nom.)
connector N female
Tracking generator output impedance 50 Ω (nom.) <
connector N female
Internal/ External Reference
Internal reference frequency 10 MHz
output level +3 dBm to +10 dBm, +8 dBm (typ.)
impedance 50 Ω (nom.)
connector BNC female
External reference frequency 10 MHz ± 5 ppm
input level 0 dBm to +10 dBm
impedance 50 Ω (nom.)
connector BNC female
External Trigger Input
External trigger input impedance 1 kΩ (nom.)
connector BNC female
Communication Interface
USB host connector A plug
protocol version2.0
USB device connector B plug
protocol version2.0
LAN LXI core 2011 device 10/100Base, RJ-45
IEC/IEEE (GPIB) bus (USB-GPIB option) IEEE488.2
General Specification
Resolution 800 x 480 pixels
Size 8 inch
Colors 64k
Printer Supported
Protocol PictBridge
Mass Memory
Mass memory flash disk (internal),
USB storage device (not supplied)
Power Supply
Input voltage range, AC 100 V to 240 V (nom.)
AC supply frequency 45 Hz to 440 Hz
Power consumption 35 W (typ.), max. 50 W with all options
Temperature operating temperature range 0°C to 50°C
storage temperature range -20°C to 70°C
Humidity 0°C to 30°C = 95% rel. humidity
30°C to 40°C = 75% rel. humidity
Altitude operating height up to 3,000m
Electromagnetic Compatibility and Safety
EMC in line with EN61326-1:2006
IEC 61000-4-2:2001 ±4.0 kV (contact discharge), ±4.0 kV (air discharge)
IEC 61000-4-3:2002 3 V/m (80 MHz to 1 GHz), 3 V/m (1.4 GHz to 2 GHz), 1 V/m (2.0 GHz
to 2.7 GHz)
IEC 61000-4-4:2004 1 kV power lines
IEC 61000-4-5:2001 0.5 kV (phase to neutral), 0.5 kV (phase to PE), 1 kV (neutral to PE)
IEC 61000-4-6:2003 3 V, 0.15 to 80 MHz
IEC 61000-4-11:2004 voltage dip: 0% UT during half cycle, 0% UT during 1 cycle, 70% UT
during 25 cycles
short interruption: 0% UT during 250 cycles
Electrical safety in line with
UL 61010-1:2012, CAN/CSA-C22.2 No. 61010-1-12, EN 61010-1:2010
(W x H x D) 361.6 mm × 178.8 mm × 128 mm
(14.2 in × 7.0 in × 5.0 in)
Standard 4.55 kg (10.0 lb)
With tracking generator 5.15 kg (11.4 lb)
Calibration Interval
Recommended calibration interval 1 year


Write a review

Note: HTML is not translated!
    Bad           Good
  • Views: 4190
  • Brand: RIGOL
  • Product Code: DSA832E-TG
  • MPN: DSA832E-TG
  • Availability: In Stock
  • Price NET:
  • 2.395,00€
  • Price incl 22% VAT: 2.921,90€

Tags: rigoldsa800


Very good service and fast reply. Higly recommended.

Per Ekström on 27/05/2020

Super fast, prompt on helping with customer request!

Jelena on 27/05/2020