⬇️ DOWNLOAD THE 3RD EDITION OF THE EMI/EMC CATALOG SIGLENT CATALOG ⬇️

Pico TA042 100MHz 1400V Active Differential Oscilloscope Probe 100:1/1000:1

Pico TA042 100MHz 1400V Active Differential Oscilloscope Probe 100:1/1000:1

Pico Technology TA042 is an active differential probe suitable for high common-mode voltage measurement applications up to ±1400 V (DC + peak AC). It is capable of acquiring higher speed signals of up to 100 MHz.

This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low speed balanced differential signals found in serial communications buses.

The TA042 is an active probe powered by either four AA batteries, included, or the TA531 USB to DC Jack power lead, also included as standard. The TA531 is intended for use with generic USB wall chargers (not included).

TA042 active differential oscilloscope probe specifications
Bandwidth DC to 100 MHz (–3 dB)
Attenuation ranges 100:1/1000:1
Rise Time 3.5 ns
Accuracy ±2%
Input impedance 4 MΩ ∥ 7 pF each side to ground
Input voltage
Max differential voltage input (100:1)
Max differential voltage input (1000:1)
± 140 V (DC + peak AC) or 140 V RMS
±1400 V (DC + peak AC) or 1000 V RMS
Common mode range ±1400 V (DC + peak AC) or 1000 V RMS
(100:1 and 1000:1)
Absolute maximum voltage
(differential or common-mode)
±1400 V (DC + peak AC) or 1000 V RMS CAT III (1/100 & 1/1000)
Output
Swing ±1.4 V into 1 MΩ
Offset (typical) <±5 mV
Noise (typical)   0.9 mV RMS
Source impedance (typical)  50 Ω
CMRR (typical) 80 dB @ 60 Hz; 50 dB @ 1 MHz
Ambient operating temperature –10 to 40 °C
Ambient storage temperature –30 to 70 °C
Power requirements
Standard 4 x AA cells or 5 V USB to DC Power cable (TA531)
Length of input leads 30 cm
Length of BNC lead 90 cm
Weight 500 g
Dimensions (LxWxH) 207 mm x 83 mm x 38 mm

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email [email protected]

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

  • Views: 7411
  • Brand: Pico Technology
  • Product Code: TA042
  • MPN: TA042
  • Units in stock ⟹ 0, lead time 3 weeks
  • Price NET:
  • 629,00€
  • Price VAT included: 767,38€

Tags: pico-taxx

Abeba 837630-41 ESD-Occupational shoes rubber, Clog ESD, white color, size (EU) 41.View all colors..
55,00€
TekBox TBRFH1-100-SMAF-SMAF-3-0 is a RF Housing 100mm SMA/Female to SMA/Female..
30,00€
Portwest AB625Y8R - Level D Cut Resistant Glove in HPPE and Steel. Level D protective glove designed..
30,00€
Desco Europe SCS ECWS61M-1 WRIST STRAP, ADJUSTABLE, FABRIC, BLUE, 1.8M CORD One size fits all adjus..
14,12€
Peelable paste to protect heat sensitive components during soldering.Composed of blue latex, it cont..
125,00€