SELECT LANGUAGE AND SHIPPING COUNTRY

PicoScope 3406D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 200 MHz

PicoScope 3406D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 200 MHz

PicoScope 3406D MSO PC Oscilloscope MSO 4+16 channels with FG/AWG, 200 MHz

Power, portability and performance
PicoScope 3000D MSO Series USB-powered PC oscilloscopes are small, light, and portable and can easily slip into a laptop bag while offering a range of high performance specifications.
These oscilloscopes offer 2 or 4 analog channels, plus 16 digital channels and a built in function / arbitrary waveform generator.  Key performance specifications:
200 MHz analog bandwidth
1 GS/s real-time sampling
512 MS buffer memory
100,000 waveforms per second
16 channel logic analyzer
Arbitrary Waveform Generator
USB 3.0 connected and powered
Serial decoding and mask testing as standard
Windows, Linux and Mac software

Supported by the advanced PicoScope 6 software, these devices offer an ideal, cost-effective package for many applications, including embedded systems design, research, test, education, service, and repair.

Selection table:

Product Channels Bandwidth Sampling Rate Buffer Memory Resolution (Enhanced)
3203D 2 50 MHz 1 GS/s 64 MS 8 bit (12 bits)
3203D MSO 2+16 50 MHz 1 GS/s 64 MS 8 bit (12 bits)
3204D 2 70 MHz 1 GS/s 128 MS 8 bit (12 bits)
3204D MSO 2+16 70 MHz 1 GS/s 128 MS 8 bit (12 bits)
3205D 2 100 MHz 1 GS/s 256 MS 8 bit (12 bits)
3205D MSO 2+16 100 MHz 1 GS/s 256 MS 8 bit (12 bits)
3206D 2 200 MHz 1 GS/s 512 MS 8 bit (12 bits)
3206D MSO 2+16 200 MHz 1 GS/s 512 MS 8 bit (12 bits)
3403D 4 50 MHz 1 GS/s 64 MS 8 bit (12 bits)
3403D MSO 4+16 50 MHz 1 GS/s 64 MS 8 bit (12 bits)
3404D 4 70 MHz 1 GS/s 128 MS 8 bit (12 bits)
3404D MSO 4+16 70 MHz 1 GS/s 128 MS 8 bit (12 bits)
3405D 4 100 MHz 1 GS/s 256 MS 8 bit (12 bits)
3405D MSO 4+16 100 MHz 1 GS/s 256 MS 8 bit (12 bits)
3406D 4 200 MHz 1 GS/s 512 MS 8 bit (12 bits)
3406D MSO 4+16 200 MHz 1 GS/s 512 MS 8 bit (12 bits)
3425 4 Differential 5 MHz 20 MS/s 512 KS 12 bit (16 bits)

 

PicoScope 3000D MSO oscilloscope specifications
 

Oscilloscope — Vertical (analog)
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Input channels 2 channels, BNC single-ended 4 channels, BNC single-ended
Bandwidth (-3 dB) 60 MHz 100 MHz 200 MHz 60 MHz 100 MHz 200 MHz
Hardware bandwidth limiter  Switchable, 20 MHz
Rise time (calculated) 5.8 ns 3.5 ns 1.75 ns 5.8 ns 3.5 ns 1.75 ns
Vertical resolution 8 bits
Input ranges ±20 mV to ±20 V full scale in 10 ranges
Input sensitivity 4 mV/div to 4 V/div in 10 vertical divisions
Input coupling AC / DC
Input characteristics 1 MΩ ±1%, in parallel with 14 pF ±1 pF
DC accuracy ±3% of full scale ±200 μV
Analog offset range
(vertical position adjust)
±250 mV (20 mV, 50 mV, 100 mV, 200 mV ranges)
±2.5 V (500 mV, 1 V, 2 V ranges)
±20 V (5 V, 10 V, 20 V ranges)
Offset adjust accuracy ±1% of offset setting, additional to DC accuracy
Overvoltage protection ±100 V (DC + AC peak)

 

Oscilloscope — Vertical (digital)
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Input channels 16 channels (2 ports of 8 channels each)
Input connectors 2.54 mm pitch, 10 x 2 way connector
Maximum input frequency 100 MHz
Minimum detectable pulse width 5 ns
Input impedance (with TA136 cable) 200 kΩ ±2% ∥ 8 pF ±2 pF
Digital threshold range ±5 V
Input dynamic range ±20 V
Overvoltage protection ±50 V
Threshold grouping Two independent threshold controls: Port 0 (D0 to D7), Port 1 (D8 to D15)
Threshold selection TTL, CMOS, ECL, PECL, user-defined
Threshold accuracy ±100 mV
Minimum input voltage swing 500 mV pk-pk
Channel-to-channel skew < 2 ns typical
Minimum input slew rate 10 V/µs

 

Oscilloscope — Horizontal
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Maximum sampling rate (real-time) 1 GS/s (1 analog channel in use)
500 MS/s (Up to 2 analog channels or digital ports* in use)
250 MS/s (Up to 4 analog channels or digital ports* in use)
125 MS/s (5 or more analog channels or digital ports* in use)
*A digital port contains 8 digital channels
Maximum sampling rate (repetitive signals*) 2.5 GS/s 5 GS/s 10 GS/s 2.5 GS/s 5 GS/s 10 GS/s
Maximum sampling rate
(continuous streaming mode)
10 MS/s in PicoScope software
125 MS/s when using the supplied SDK (PC-dependent)
Maximum waveforms per second 100,000 wfm/s (PC dependent)
Timebase ranges 2 ns/div to 5000 s/div 1 ns/div to 5000 s/div 500 ps/div to 5000 s/div 2 ns/div to 5000 s/div 1 ns/div to 5000 s/div 500 ps/div to 5000 s/div
Buffer memory 128 MS 256 MS 512 MS 128 MS 256 MS 512 MS
Buffer memory (streaming) 100 MS in PicoScope software. Up to available PC memory when using supplied SDK.
Maximum buffer segments 10 000
Timebase accuracy ±50 ppm ±2 ppm ±2 ppm ±50 ppm ±2 ppm ±2 ppm
Sample jitter < 3 ps RMS typical

* analog channels only
 

Triggering (all)
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Trigger modes None, auto, repeat, single, rapid (segmented memory)
Advanced triggers* Edge: rising, falling or dual edge with adjustable hysteresis
Window: signal enters or exits a user–defined voltage range
Pulse width: a negative or positive pulse is wider or narrower than a set width, or inside/outside a range of widths
Window pulse width: signal is inside or outside a voltage range for a set time
Dropout: signal does not cross a voltage threshold for at least a set time
Window dropout: signal does not enter or exit a voltage range for at least a set time
Interval: time between two edges is greater or less than a set time, or inside/outside a time range
Logic: arbitrary logic state of Channels and EXT matches a user–defined pattern
Runt pulse: signal crosses one voltage threshold and returns without crossing the other
Trigger sensitivity* Digital triggering provides 1 LSB accuracy up to full bandwidth of scope
Trigger types (ETS mode)* Rising edge, falling edge
Trigger sensitivity (ETS mode)* 10 mV p-p typical (at full bandwidth)
Maximum pre–trigger capture Up to 100% of capture size
Maximum post–trigger delay Up to 4 billion samples (selectable in 1 sample steps)
Trigger re–arm time < 1 µs on fastest timebase
Maximum trigger rate Up to 10,000 waveforms in a 10 ms burst

* analog channels only
 

Triggering (digital)
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Source D0 to D15
Trigger types Combined pattern and edge
Advanced triggers Edge, pulse width, dropout, interval, logic

 

Function generator
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Standard output signals Sine, square, triangle, DC voltage, ramp, sinc, Gaussian, half-sine, white noise, PRBS
Standard signal frequency DC to 1 MHz
Sweep modes Up, down, dual with selectable start / stop frequencies and increments
Output frequency accuracy As oscilloscope
Output frequency resolution < 10 mHz
Output voltage range ±2 V
Output voltage adjustment Signal amplitude and offset adjustable in approximate 1 mV steps within overall ±2 V range
Amplitude flatness < 0.5 dB to 1 MHz typical
DC accuracy ±1% of full scale
SFDR > 60 dB 10 kHz full scale sine wave
Output characteristics Rear panel BNC, 600 Ω output impedance
Overvoltage protection ±20 V

 

Arbitrary Waveform Generator
Model PicoScope 3204D MSO PicoScope 3205D MSO PicoScope 3206D MSO PicoScope 3404D MSO PicoScope 3405D MSO PicoScope 3406D MSO
Update rate 20 MS/s
Buffer size 32 kS
Resolution 12 bits (output step size approximately 1 mV)
Bandwidth > 1 MHz
Rise time (10% to 90%) < 120 ns

 

Probe Compensation Output
Impedance 600 Ω
Frequency 1 kHz
Level 2 V pk-pk

 

Physical specifications
PC connectivity USB 3.0 (USB 2.0 compatible)
Dimensions 190 mm x 170 mm x 40 mm (including connectors)
Weight < 0.5 kg
Temperature range Operating: 0 °C to 40 °C (15 °C to 30 °C for stated accuracy).
Storage: –20 °C to 60 °C
Humidity range Operating: 5% RH to 80% RH non-condensing.
Storage: 5% RH to 95% RH non-condensing

 

Dynamic performance
Crosstalk Better than 400:1 up to full bandwidth (equal voltage ranges)
Harmonic distortion < –50 dB at 100 kHz full scale input
SFDR 52 dB typical
Noise 180 μV RMS (on most sensitive range)
Bandwidth flatness +0.3 dB, –3 dB from DC to full bandwidth

 

Spectrum Analyzer
Frequency range DC to maximum bandwidth of scope
Display modes Magnitude, peak hold, average
Scale / Units Y axis : logarithmic (dbV, dBu, dBm, arbitrary) or linear (volts)
X axis : linear or log 10
Windowing functions Rectangular, Gaussian, triangular, Blackman, Blackman–Harris, Hamming, Hann, flat–top
Number of FFT points Selectable from 128 to 1 million in powers of 2

 

Math channels
Functions −x, x+y, x−y, x*y, x/y, x^y, sqrt, exp, ln, log, abs, norm, sign, sin, cos, tan, arcsin, arccos, arctan, sinh, cosh, tanh, derivative, integral, min, max, average, peak, delay
Software filters Low pass, high pass, band stop, bandpass
Graphing measurements Frequency, duty cycle
Operands All input channels, reference waveforms, time, constants, pi

 

Automatic measurements (analog channels only)
Oscilloscope mode AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak to peak, rise time, rising rate.
Spectrum mode Frequency at peak, amplitude at peak, average amplitude at peak, total power, THD %, THD dB, THD+N, SFDR, SINAD, SNR, IMD
Statistics Minimum, maximum, average, standard deviation

 

Serial decoding
Protocols CAN, FlexRay, I²C, I²S, LIN, SPI, UART/RS-232

 

Mask limit testing
Statistics Pass/fail, failure count, total count

 

Display
Interpolation Linear or sin(x)/x
Persistence modes Digital color, analog intensity, fast, custom, none

 

General
Power requirements 2-channel models: powered from single USB 3.0 port or two USB 2.0 ports (dual cable supplied)
4-channel models: powered from single USB 3.0 port or two USB 2.0 ports (dual cable supplied) or use the AC adaptor supplied.
Safety approvals Designed to EN 61010-1:2010
EMC approvals Tested to EN 61326-1:2006 and FCC Part 15 Subpart B
Environmental approvals RoHS and WEEE compliant
Software included PicoScope 6 for Windows. Windows SDK.
Example programs (C, Visual Basic, Excel VBA, LabVIEW).
Optional free software PicoScope 6 Beta for Linux and OS X. Drivers for Linux and OS X.
PC requirements Microsoft Windows XP (SP3), Windows Vista, Windows 7 or Windows 8 (not Windows RT)
Output file formats bmp, csv, gif, jpg, mat, pdf, png, psdata, pssettings, txt
Output functions copy to clipboard, print
Languages Chinese (simplified), Chinese (traditional), Czech, Danish, Dutch, English, Finnish, French,
German, Greek, Hungarian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese,
Romanian, Russian, Spanish, Swedish, Turkish

Note: quoted specifications apply when using PicoScope 6 software.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

this link open a new window

  • Views: 5722
  • Brand: Pico Technology
  • Product Code: 3406D MSO
  • Availability: In Stock
  • Price NET:
  • 2.025,00€
  • Price incl 22% VAT: 2.470,50€

Tags: pico3000

Testimonials

Servizio assistenza in chat molto utile e prezzi buoni. Spedizione veloce e prodotto ben imballato. Tutto ok :)

ELENA on 20/09/2019

Found a great deal on a Hakko that I couldn't pass by. Everything worked perfectly, iron was delivered quickly and I saved a lot of money :) What's not to like? Recommended!

Mikko on 20/09/2019