GW Instek LCR-8230A up to 30 MHz LCR Meter

GW Instek LCR-8230A up to 30 MHz LCR Meter

GW Instek LCR-8230A DC, 10Hz~30MHz High-Frequency LCR Meter with Equivalent Circuit Model Analysis

- Wide Test Frequency DC, 10Hz~50/30/20/10/5 MHz
- 7" LCD color Display
- 0.08% Basic Accuracy
- Displaying Four Measurement Results Simultaneously From 17 Selectable Measurement Parameters Freely
- 15 Steps List Measurement
- Two Curves Sweep Mode
- Equivalent Circuit Model Analysis
- Internal DC Bias Voltage ±12V
- USB Storage Available
- ALC Function Available
- Standard Interfaces: RS-232C, USB Host/Device, LAN, GPIB and Handler
- Universal Power Input

What's in the box:
Safety Sheet x1, CD x1 (User manual), Power cord x1, LCR-06B x1

LCR-DB1 DC Bias Voltage Box (up to 200V)

Optional Accessories:
LCR-05A Test Fixture for axial & radial leaded components (up to 50MHz)
LCR-06B Test Lead with Kelvin clip (4 wire type)
LCR-07 Test Lead with Alligator clip (2 wire type)
LCR-08 Test Fixture (Tweezers) for SMD/Chip components
LCR-10A Test Fixture for Bottom Electrode components (up to 50MHz)
LCR-12 Test Lead with Kelvin clip (4 wire type)
LCR-15A Test Fixture for SMD/Chip components (up to 50MHz)
GTL-234 RS-232C Cable
GTL-246 USB Cable
GTL-248 GPIB Cable
GRA-445 Rack Mount Kit (19", 4U)

Model LCR-8250A LCR-8230A LCR-8220A LCR-8210A LCR-8205A
Test Frequency DC, 10Hz~50MHz DC, 10Hz~30MHz DC, 10Hz~20MHz DC, 10Hz~10MHz DC, 10Hz~5MHz

GW Instek launches a new series of high-frequency LCR meter ~ LCR-8200(A), which has five models and the maximum test frequency is up to 50MHz. The entire series adopts 7-inch color display and features a high measurement accuracy (0.08%).

The measurement results can be presented numerically or graphically according to the selected measurement mode, allowing users to optimally interpret the characteristics of the DUT. At the same time, a full range of standard interfaces such as USB device / RS-232C / Handler and GPIB allow users to control the instrument by the most familiar interface without worrying about additional hardware investment costs.

Furthermore, the series also provides USB storage function when operating in the graphics mode. The measured characteristic curves and values of the DUT are saved for subsequent analysis. The wide variety of features of the LCR-8200(A) can help users easily respond to the test requirements of passive components in R&D, engineering, and production.

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email info@batterfly.com

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

  • Views: 255
  • Brand: GW Instek
  • Product Code: LCR-8230A
  • MPN: 01CR8230A0GT
  • EAN: 4713008678510
  • Warranty: 2 years
  • Units in stock: 0, lead time 3 weeks
  • Price NET:
  • 26.086,00€
  • Price VAT included: 31.824,92€

GW Instek, for the time being, will not provide GPIB interface for all products as of today because of the impact of the global chip shortage.
The disclosed information of the existing products with standard or optional GPIB interface is void. Please contact us for the status of the interface options.
We will make an announcement for the update of GPIB interface. Thank you for your understanding.

Tags: gwinstek-lcr8200a