Rohde & Schwarz NGC100 Series Introduction

One, two or three channels - the Rohde & Schwarz NGC100 power supplies' specifications and wide range of functions make them ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the Rohde & Schwarz NGC100 series - even in 19" racks.

ROHDE & SCHWARZ NGC100 POWER SUPPLY SERIES

Up to three channels in a universal instrument

❮ ❯

AT A GLANCE

One, two or three channels - the Rohde & Schwarz NGC100 power supplies specifications and wide range of functions make them ideal for use in development labs and industrial environments. Thanks to their high energy efficiency, the power supplies remain cool and quiet, even at maximum load. Practical interfaces and connectors allow users to work quickly and conveniently with the NGC100 series - even in 19" racks.

The Rohde & Schwarz NGC100 family consists of three models, all with a maximum total power of up to 100W and a continuous voltage range from 0V to 32V. The single channel NGC101 delivers a maximum of 10A, the two-channel NGC102 a maximum of 5A and the three-channel NGC103 a maximum of 3A per channel. The two-channel and three-channel models enable users to connect multiple outputs in parallel or in series to increase the voltage or current.

The outputs are galvanically isolated, floating and protected against overloading and short circuits.

Voltage, current and power values are output on a brilliant QVGA display.

Developers and industrial users benefit from useful functions such as the sequenced start of channels, EasyArb and EasyRamp functions that are directly programmable on the device, an analog input for external control of voltage values, an external trigger input for controlling channels and arb steps, a wide range of logging functions and an integrated energy meter.

The Rohde & Schwarz NGC100 power supplies offer a variety of protective functions to prevent damage to the instrument and the DUT.

You can set the maximum current (electronic fuse, overcurrent protection/OCP), the maximum voltage (overvoltage protection/OVP) or the maximum power (overpower protection/OPP) separately for each channel. The output channels switch off when any of their set limits are reached. Overtemperature protection (OTP) prevents the instrument from overheating.

Switching technology ensures high efficiency, with minimum heat dissipation even at full load.

In industrial applications, power supplies are often installed in 19" racks. The HZC95 rack adapter is available for this purpose and can even hold two instruments of this class side by side.

Additional connections for all channels, including sense lines, are provided on the rear panel to simplify use in system cabinets.

The power supplies can be controlled via LAN, USB or even via a GPIB interface when using the NGC100-G models.

The Rohde & Schwarz NGC100 power supplies offer top quality and intelligent, practical functions at an extremely attractive price.

KEY FACTS:

• Three versions with one, two or three output channels
• 100W maximum total output power for all Rohde & Schwarz NGC models
• Maximum output voltage of 32V per channel; higher voltages possible in serial operation
• High output currents up to 3A / 5A / 10A - depending on the number of output channels; higher currents possible in parallel operation
• Linear postregulation for low residual ripple and noise
• Electronic fuse (OCP), adjustable maximum voltage (OVP), adjustable maximum power (OPP) and overtemperature protection (OTP)
• Standard USB / LAN, special models (NGC100-G) with additional IEEE-488 GPIB interface
• Rear panel connections, including sense lines, for all channels