⬇️ DOWNLOAD THE NEW RIGOL CATALOG ⬇️

HAKKO FA-430 Smoke absorber Air purifying

-17% HAKKO FA-430 Smoke absorber Air purifying

HAKKO FA-430 Air-purifying fume extractor realizing powerful suction with quiet operation
Freestanding flexible ducts facilitate production changeovers
Three airflow levels are selectable according to working environments

AVAILABLE IN BUNDLE

Features:
- HEPA filter (High Efficiency Particulate Air Filter)
- Filters out 99.97% of particles greater than 0.3μm
- Recommended for quiet laboratory and office

What's in the box:
1 x FA-430 Main unit, 1 x Power cord, Cap, 1 x Main filter, 10 x Pre-filters, 1 x Instruction manual

Duc Set (not included):

Duct Set C1571
(With rectangular nozzle)

NOT INCLUDED

Duct, Adapter, Rectangular nozzle, Net, Instruction manual

Duct Set C1572
(With round nozzle)

NOT INCLUDED

Duct, Adapter, Round nozzle, Net, Instruction manual


Quiet operation and powerful suction.

Exhaust noise has been reduced without sacrificing suction performance by the addition of a silencer unit to the exhaust outlet to ensure smooth air outflow. A high-performance motor with 1,500 Pa of static pressure provides powerful suction and quiet operation.



Notes regarding graph:

The HAKKO FA-430 features significantly reduced noise level in medium airflow mode despite the fact that suction performance remains almost unchanged compared to the previous model. High airflow mode also provides quieter operation than the previous model.
*Suction performance values are for when two ducts are used.
*Measured values for HAKKO 421 were taken when the unit was used with a 60 Hz power supply.

Catch harmful smoke with freestanding ducts and adjustable air volume to suit your working environment
Is your smoke absorber affected by air conditioning? Are you fed up with having to re-adjust ducts after every line change? The HAKKO FA-430 fume extractor is the answer to your problems.

Airflow adjustment
Three airflow modes are available: High, Medium, and Low. Significantly improve your working environment by using an airflow volume that suits the worksite and the job.
Low mode: Not easily affected by the surrounding environment. For use in small, quiet locations. (For when low-noise operation is a priority.)
Medium mode: For normal use.
High mode: For use in locations that are significantly affected by the surrounding environment. (For when suction performance is a priority.)

Freestanding ducts
Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed. Say goodbye forever to ducts that are long, heavy, and hard-to-handle.



Photo above:
Bends and stretches freely for perfect placement!
Photo on left:
Lightweight and compact, the HAKKO FA-430 weighs only 7.5 kg. Built-in handles allow the fume extractor to be moved easily, facilitating line changeovers.
*HAKKO FA-430 weighs 35% less than previous models.

If the duct is mounted at an angle above the workpiece, it is easily affected by air conditioning If the duct is mounted directly above, it can be difficult to see the workpiece Duct is mounted on the worktable to provide excellent suction performance



Filter replacement notification function ensures excellent trapping efficiency can be maintained at all times
No matter how sophisticated a fume extractor is, if the filter is not replaced at the correct time, it will not be able to give maximum performance. The HAKKO FA-430 detects the number of fan revolutions and notifies the operator of the appropriate time to replace the filter, guaranteeing a comfortable working environment.

Pre-filter
When the pre-filter is 80% clogged or has been used for 200 hours, the orange indicator flashes on and off.
Main filter
When the 10th pre-filter needs replacing, the orange and red lamps flash on and off.


Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email info@batterfly.com

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts


  • Views: 18145
  • Brand: HAKKO
  • Product Code: FA430-12
  • MPN: FA430-12
  • Units in stock: 1
  • Units available arriving from 15/07/2024: 4
  • Price NET:
  • 942,50€
  • 784,80€
  • Save 17%
  • Price VAT included: 1.149,85€ 957,46€

Tags: hakko-fa-43x

Available bundles
HAKKO FA-430 Air-purifying fume extractor realizing powerful suction with quiet operation.Freestanding flexible ducts facilitate production changeover..
+
Bundle price: 755,00€
You save 210,70€!

Add bundle to Cart