HAKKO FR-410 NEW Desoldering tool with built-in vacuum pump 140W

-12% HAKKO FR-410 NEW Desoldering tool with built-in vacuum pump 140W

HAKKO FR-410 NEW Desoldering tool with built-in vacuum pump 140W
140 W high power enables perfect desoldering on multi-layer PWB
New type nozzle can fit onto micro land patterns and narrow space
Separate nozzle and heater ensure running cost advantage for you
ESD SAFE by design

Packaging List
- Station (FR-410)
- Desoldering tool (FR-4103)
- Standard nozzle Φ1.0mm S type (No.N61-05)
- Power cord
- Iron holder (with cleaning wire)
- Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater, Cleaning drill for ø1.0 mm, Nozzle wrench, Filter [qty 2], Ceramic paper filter [qty 4])
- Instruction manual



140 W high powers enable perfect desoldering for the components on multi-layer PWB
Increasing the power to 140 W from 50 W of our previous models (HAKKO 474・475), it can make it easy to desolder on multi-layer PWB which was never an easy job, and it can also shorten the process time.

A wide selection of nozzle, with the addition of new types, is available for a variety of desoldering works.
See all N61 nozzles.
Applicable to even micro lands, components in a narrow space or flat type terminals on the PWB of downsized devices like mobile phone.



Secure desoldering, valve function that suctions with high pressure
Suction starts 0.2 seconds after pulling the trigger for instance and high pressure suction to achieve complete desoldering.



Reduction of solder clogging
Improvement in heating core
Heating ability for backside of heating core is increased to ensure suctioned solder be carried to filter pipe and avoid solder clogging.



Featuring ACF (Anti Clogging Function)
ACF (Anti Clogging Function) ensures suctioned solder be carried to filter pipe by keeping the pump running for a certain period of time (1 to 5 seconds) automatically after releasing trigger.

Improvement in maintainability
Easy nozzle replacement
The dedicated wrench allows safe, easy and smooth nozzle replacement.



Easy heater replacement
Easy heater replacement by removing 3 screws on the part of heating core.


Larger filer and more transparency
Filter size has been increased to protect the pump from contaminants, and transparent filter cover allows quick visual check of the filter condition.



Tool box
FR-410 comes with a tool box that contains of maintenance tools to keep nozzles and heater in a good condition.



Featuring a large LCD display
Very easy to see temperature on the large LCD display
Vacuum indicator to check clogging



Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email [email protected]

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 06/24/2022: 3 | indicates that there will be available units arriving on that date

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti


For any other questions please contact us through our main contacts

  • Views: 13027
  • Brand: HAKKO
  • Product Code: FR410-70
  • MPN: FR410-70
  • Units in stock: 7
  • Price NET:
  • 936,00€
  • 823,00€
  • Save 12%
  • Price VAT included: 1.141,92€ 1.004,06€

Tags: hakkofr410, hakkodesoldering