SIGLENT SSM5000A Switch Matrix Series.
SIGLENT SSM5000A series switch matrix, can expand the number of test ports of network analyzer, signal source, spectrum analyzer and other equipment. The series names are like SSM5XYZA, The X represents different operating frequency, Y represents the number of combiner ports, Z represents the number (divided by 6) of division ports. When X is 1, the operating frequency range covers 9 kHz-9 GHz, when it is 3, covers 100 kHz-26.5 GHz. And the series are with up to 4 input ports and up to 24 output ports, supporting USB, LAN, Direct Control communication modes. The Direct Control interface on the switch matrix can further expand the number of test ports and support a simplified multi-port calibration algorithm, which can greatly improve the efficiency of calibration. In addition to SIGLENT instruments, it also supports other brand instruments. It is suitable for 19-inch standard chassis and can be widely used in multi-port test environments such as antennas and 5G component modules.
Series features:
- Characteristic impedance: 50 Ω
- Highest frequency: 9 GHz (or 26.5 GHz)
- Maximum number of input ports: 4
- Maximum number of output ports: 24
- RF connector: 3.5 mm female
- Maximum input power: 20 dBm
- Maximum input DC voltage: 35 V
- Standard interfaces: LAN, USB Device, Direct Control (in), Direct Control (out)
- Screen size: 2.4"
SIGLENT SSU5000A Mechanical Switch Series
SIGLENT SSU5000A is a mechanical switch series, it is defined by the middle digits which indicate the frequency range and the last number indicates the number of ports. Operating frequency range covers DC-50GHz, contains 1-4 independent single-pole double-throw mechanical switches with SMA or 2.4mm connectors, or single-pole six-throw mechanical switches, support TTL level control, can be widely used in multi-channel and multi-port test environment.
Series features:
- Characteristic impedance: 50 Ω
- Highest frequency: 18 GHz, 26.5 GHz and 50 GHz
- Maximum number of test ports: 12 (2 mechanical switches)
- RF connector: SMA Female or 2.4mm Female
- Driving voltage: 12V
- Maximum driving current: 1.25A
- Control mode: TTL
SIGLENT SEM5000A Electronic Calibrator (ECal) Series
SIGLENT SEM5000A series electronic calibrators include 5002A / 5012A / 5022A / 5032A / 5004A / 5014A / 5024A / 5034A, covering the frequency bands of 9kHz to 4.5GHz / 9kHz to 9GHz / 100kHz to 13.5GHz / 100kHz to 26.5GHz, with USB interface for communication and power supply, and the RF connectors come in three forms: SMA, 3.5mm and Type-N. They are suitable for calibration and error correction of SHA800A series, SVA1000X series, SNA5000X series, SNA5000A series and SNA6000A series vector network analyzers of SIGLENT.
The SEM5000A series of ECal module are simple, fast, efficient, accurate and widely applicable, as follows:
- Simple and quick: Connect the USB cable and calibrate when the indicator light shows green. The system automatically recognises it, making it easy and convenient to operate.
- Efficient and accurate: Traditional mechanical calibration methods require the operator to connect and disconnect the instrument to be measured several times using calibration devices. This not only increases the calibration time, but also the frequency of operation and the probability of human error. When calibrating with electronic calibrators, the operator only needs to make one connection - at the very beginning, the port of the electronic calibrator is connected to the test port - which significantly reduces the number of connections made during the calibration process, making the process much simpler and more efficient. As the number of connections decreases, the probability of operator error is reduced, as is the probability of connector wear and tear, which in turn reduces the cost of port connector maintenance.
- Wide applicability: SIGLENT offers a wide range of electronic calibrator models - you can choose from different series in terms of maximum operating frequency, number of ports, connector type, etc.
Series features:
- Frequency range from 9 kHz to 26.5 GHz
- Maximum input power level: +20 dBm
- Maximum protection DC voltage: ±35 V
- RF connector types: SMA female, SMA male, 3.5mm female, 3.5mm male, Type-N 50Ω female, Type-N 50Ω male
- Number of supported ports: 2,4
- Power supply control: USB 2.0
Leave a Comment