⬇️ DOWNLOAD THE 3RD EDITION OF THE EMI/EMC CATALOG SIGLENT CATALOG ⬇️

Desco Europe 50671 IONIZER, OVERHEAD, 2-FAN, ZVI, STAINLESS STEEL, 220VAC

Desco Europe 50671 IONIZER, OVERHEAD, 2-FAN, ZVI, STAINLESS STEEL, 220VAC

Discontinued model, replaced by 50602 or 50682

Desco Europe DESCO 50671 IONIZER, OVERHEAD, 2-FAN, ZVI, STAINLESS STEEL, 220VAC

  • 2-Fan Overhead Ioniser
    Neutralizes electrostatic charges on insulators and ungrounded conductors in a 61 cm x 122 cm coverage area.
  • Fast Decay Times (<3 seconds at 46 cm)
    Discharges (removes) both positive and negative electrostatic charges within the coverage area.
  • ±3 Volt Offset Voltage Balance
    Meets required limits of ANSI/ESD S20.20 (<±35 volts), ANSI/ESD STM3.1 and ESD TR53.
  • Dedicated High Voltage Power Modules with Balance Control at Each Fan
    Allows each fan to be tuned to produce the optimum decay and balance in the coverage area.
  • Sealed Plenum Air Flow
    Prevents contamination from being introduced to workstation.
  • Steady State DC Emitters
    Spaced farther apart to prevent ion recombination, increase decay efficiency, and provide a broader coverage area of ionisation.
  • Solid Tungsten Emitters
    Maintains sharp point for optimal ioniser performance.  Resists oxidation, melting and other damage that dulls the tip of the emitter 
  • 9 Speed Fan (61 to 94 L/s)
    Consistent performance at all speeds.  Low airflow may be used when working with small moving parts and components that may move with higher airflow.
  • Shielded Bearings
    Retains lubricant and minimizes contamination in the work area.
  • Stainless Steel Housing
    Minimizes foreign objects debris, corrosion, and other contaminations when used in clean or sensitive areas.
  • NIST Calibrated with Certificate
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.  For more information on calibration of Desco Europe products, see Calibration.
  • Request a Demo HERE
  • No power cord included
    Choose from 200220 or 200225
  • Made in the United States of America

*U.S. Patent 6,205,408

“Ionisers should be considered as a method for charge neutralization in cases where grounding cannot be achieved. These may include localized (bench) ionised air blowers, compressed air ionisers, spot ionisers, tape dispenser ionisers and total room ionisers.” “Air ionisation can neutralize the static charge on insulated and isolated objects by producing separate charges in the molecules of the gases of the surrounding air. When a static charge is present on objects in the work environment, it will be neutralized by attracting opposite polarity charges from the ionised air. Note that ionisation systems should not be used as a primary means of charge control on conductors or people. As with all ionisers, periodic maintenance will be needed to provide optimum performance.” (EN 61340-5-2 paragraph 5.2.9)

 

 

“Various feedback and auto balance techniques are available to ensure ioniser performance. … Providing a sensor for each ionizing device can improve feedback control. Effective control can reduce the amount of necessary maintenance. (EN 61340-5-2 paragraph 5.2.9.2 Monitoring and feedback control)

Escribir un comentario

Nota: El Código HTML no será traducido.
    Malo           Bueno

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email [email protected]

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts


  • Vistas: 4756
  • Marca: Desco Europe
  • Código del Producto: 50671
  • MPN: 50671
  • Unidades en stock → Discontinued
Desco Europe VERMASON 229190 SIGN, RIGID, CAUTION, YELLOW, 600MM x 300MM, NO LOGO Prior Vermason It..
3,93€
Beha-Amprobe NCV-1020-EUR VOLTfix tensión de sondas sin contacto..
297,00€
Discontinued model, click here to view the new modelDesco Europe VERMASON 229740 WRISTBAND, ELASTIC ..
6,62€