Pico TA488 AD2201 200MHz Active Differential Probe, BNC
Pico Technology AD2201 is a 200 MHz bandwidth active differential probe suitable for high-speed measurement applications, with a differential measurement range of ±20 V and a common-mode range of up to ±60 V (DC + peak AC).
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making differential voltage measurements. Applications include making safe measurements in power circuit applications and acquisition of high-speed balanced differential signals found in serial communications buses such as BroadR-Reach (see application note).
Recently redesigned, the AD2201 replaces the TA045 with the same performance specifications, but with improved powering options. This probe now includes an in-line battery module, with a 5 V USB power lead integrated for use with standard off-the-shelf USB chargers.
The kit includes the following items:
1 x AD2201 probe
1 (pair) Test hooks, red and black
1 (pair) Crocodile clips, red and black
1 x Battery 9V
1 x USB power cable (mains adaptor not included)
| AD2201 active differential oscilloscope probe specifications | |
| Bandwidth | DC to 200 MHz (–3 dB) |
| Attenuation ratio | 10:1 |
| Accuracy | ±1% |
| Rise time | 1.75 ns |
| Input impedance | 500 kΩ ∥ 7 pF each side to ground |
| Input voltage | |
| Differential range | ±20 V |
| Common mode range | ±60 V |
| Absolute max. voltage (either input to ground) |
±60 V |
| Output | |
| Swing (into 50 kΩ load) | ±2 V |
| Offset (typical) | < ±2 mV |
| Noise (typical) | 0.3 mV RMS |
| Source Impedance (typical) | 50 Ω |
| CMRR (typical) | 80 dB at 100 Hz; 50 dB at 10 MHz |
| Ambient operating temperature | –10 to +40 °C |
| Ambient storage temperature | –30 to +70 °C |
| Power requirements | |
| USB power lead (TA531) | 5 V DC 300 mA |
| Battery | 9 V (PP3, 6LR61) |
| General | |
| Length of input leads | 50 cm |
| Length of BNC lead | 125 cm |
| Weight | 300 g |
| Dimension (LxWxH) | 111 mm x 22 mm x 14 mm |
| Compliance | Designed and tested in accordance with the European standard publication EN 61010-031:2015 (Safety requirements for hand-held probe assemblies for electrical measurement and test) |
Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203
Main contacts: telephone +39 051 6468377 email [email protected]
The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy
All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation
For customers resident in Italy, both private and corporate, we apply the VAT of 22%
If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order
For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination
For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system
Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above
Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly
Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data
Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day
Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper
To see the shipping costs go here https://www.batterfly.com/shop/consegna
To see the payment methods go here https://www.batterfly.com/shop/pagamenti
For any other questions please contact us through our main contacts
