Fluke FEV300/KIT ITDK Test Adapter EV Charging with Type 2 Plug and 1664FC ITDK

-20% Fluke FEV300/KIT ITDK Test Adapter EV Charging with Type 2 Plug and 1664FC ITDK

Fluke FEV300/KIT ITDK Test adapter kit for Fluke FEV300 EV charging stations: 1664 FC ITDK installation tester and type 2 connector

Version also available with EU Schuko (F) plug

Key features:
- Ability to safely test PE conductor for hazardous voltage with respect to ground
- Ability to simulate various current ratings of charging cables
- Ability to simulate vehicle charging states
- Ability to simulate PE error (ground fault)
- Includes Fluke 1664 FC tester to perform installation tests and type 2 connector

What's in the Box:
1 x FEV300/BASIC Test adapter
1 x 1664 FC Multifunction installation tester
1 x FEV300-CON-TY2 Type 2 plug
1 x Carrying case

The FEV300 kit with multifunction installation tester 1664 FC is a complete kit designed to test the operation and safety of Mode 3 AC charging stations. This test adapter simulates the presence of an electric vehicle, allowing tests to be performed in conjunction with the Fluke 1664 FC installation tester so that tests can be performed quickly and efficiently in compliance with all local regulations without opening the charging station. Use the FEV300 adapter to verify that the charging station is functioning properly after installation, during periodic maintenance, or troubleshooting if the station does not deliver the appropriate charge. With the adapter kit, charging stations can be tested in accordance with IEC/EN 61851-1 and IEC/HD 60364-7-722 standards.

Ability to perform seven installation tests in one sequence
The PE protective grounding pre-test of the FEV300 kit verifies the total absence of hazardous voltage at the ground terminal. Connect the 1664 FC tester to the FEV300 kit to automatically perform seven installation tests in a single sequence via a single connection. The 1664 FC tester performs the tests in compliance with all local regulations and allows the results to be shared in real time via smartphone using Fluke Connect Measurements.

Safety, simplicity and convenience
A variety of tests can be performed, including ground fault checks, cable insulation, voltage and duty cycle measurements to see the maximum current available for charging, all with a single adapter that integrates securely with Fluke's portfolio of test and measurement tools. There is no need at all to bring an electric vehicle on-site for charging station troubleshooting: the FEV300 adapter simulates an electric vehicle connected to a charging station to easily perform performance and maintenance-related tests.
- PE Pre-Test: Ability to safely pre-test the PE conductor to check for hazardous voltage with respect to ground
- PP (Proximity Pilot) "Cable Simulation" status: The PP status rotary switch allows the adapter to simulate various current flow rates of charging cables
- CP (Control Pilot) "Vehicle Simulation" status: Use the CP status rotary switch to simulate various charging states
- CP "E" error simulation: Ability to simulate PE error (ground fault)

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email info@batterfly.com

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

  • Views: 1171
  • Brand: FLUKE
  • Product Code: FLK-FEV300/KIT ITDK
  • MPN: 5363638
  • EAN: 0195112050378
  • Warranty: 3 years
  • Units in stock: 0, lead time 2 weeks
Hurry, This Offer Expires in:
  • Price NET:
  • 2.800,00€
  • 2.249,00€
  • Save 20%
  • Price VAT included: 3.416,00€ 2.743,78€
  • Special price end date: 31/12/2023

Tags: fluke-flk-fev300