HAKKO FX-888D genuine soldering station 220V, blue and yellow
HAKKO FX-888D digital regulation soldering station blue and yellow
Soldering station blue and yellow (FX-888D)
Soldering iron (FX-8801 with soldering tip type T18-B)
Iron holder (with cleaning wire, cleaning sponge)
Schuko, 220-240 Vac, 50/60Hz
GO TO PAGE OF TIPS T18
Digital model in an analog-model price bracket
Features adjustment mode, preset mode, and password function
Separable tip/heater design provides excellent value for money
Reliable digital technology by HAKKO - Introducing the HAKKO FX-888D
Excellent thermal recovery
Heater output has been increased by 30% compared to that of the conventional models HAKKO 936/937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity.
This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life.
Designed to be User-Friendly
Compact station body requires a space of only 100 (W) x 120 (D) mm. What's more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over.
Simple and easy operation
With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you're not familiar with operation of machines, you can operate it without difficulty.
Iron holder with full of functions
An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment.
Strict temperature management
The FX-888D's digital display makes it easy to check the set temperature at a glance.
Settings can be locked using a password to prevent them from being changed unexpectedly. Of course, it is possible to restrict all setting changes or prevent users from switching to particular modes. It allows you to choose a style of usage best suited for your worksite.
This feature is very convenient when you want to change the set temperature to suit a particular workpiece, component, or tip shape. Simply select the desired temperature from a selection of preset temperatures registered in advance. (Up to 5 preset temperatures can be registered.) Preset mode can save your trouble and improve workability.
Temperature adjustment* is an essential part of any strict quality control system. With adjustment mode, what used to be a troublesome procedure is now as simple as entering the measured tip temperature to FX-888D.
*Adjust the tip temperature to match the set temperature in case that there is a difference between those temperatures due to tip shape, heater replacement, or other factors.
Measuring tip temperature with a tip thermometer (HAKKO FG-100)
|Temperature range||50 to 480ºC|
|Temperature stability||±1ºC at idle temperature|
|Output voltage||AC 26V|
|Power consumption||65W (26V)|
|Tip to ground resistance||<2Ω|
|Tip to ground potential||<2mV|
|Heating element||Ceramic heater|
|Standard tip||Shape-B (No.T18-B)|
|Total length||217mm (with B tip)|
|Weight||46g (with B tip)|