Desco Europe 220521 STATGUARD FLOOR FINISH 10 L

Desco Europe 220521 STATGUARD FLOOR FINISH 10 L

Statguard® Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. It meets EN 61340-5-1 ESD Floors Table 1 R_G less than or equal to 1x10E9 ohms. Statguard® Static Dissipative Floor Finish is a free flowing liquid emulsion, which can be applied on any hard surface or sealed floor including vinyl, vinyl asbestos, linoleum, rubber, asphalt, sealed or painted wood, terrazzo and concrete. Statguard® technology eliminates the need for static control tile or floor mats. Statguard® dries in one hour and is ideal for clean room and electronic manufacturing, assembly, and test areas. This floor finish is for use in environments with relative humidity of 30-65%.
Statguard® provides superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statguard® and tested it to their slip resistance standards. To ensure employee safety and to mitigate user’s liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly installed and maintained.

• Prior Vermason item number: C903
• Non-tribocharging
  Limits charge generation when walking - <100 volts per ANSI/ESD S20.20
• Static dissipative
  With ESD footwear, removes the charge off your body
• Can be applied on many hard surfaces or sealed floors including vinyl, VCT, linoleum, rubber, epoxy, acrylic paint, and concrete
  Converts a non-ESD floor to an ESD floor
• UL classified for slip resistance only
  Ensures worker safety and mitigates user’s liability exposure
• 18% solids
  Easy to apply; improves productivity
• Cross-linked polymer
  Produces high-gloss, durable finish
• Low humidity formulation
  Provides greater durability in all humidity environments
• RTT 10⁷ ohms per ESD S7.1 @50% R.H.
• Coverage
  49 square meters per litre per coat on smooth surfaces
• Bag-in-box packaging
• Lead-free RoHS compliant
• Trouble shoot common floor care problems. Click HERE.
• Made in the United States of America

Click Here for Clean Room and Raised Floor application instructions

“When the use of a wrist strap system is impractical, the [ESD] floor and [ESD] footwear shall be the primary means of ESD control.” (EN 61340-5-1 clause 5.5 EPA working practices)
When ESD footwear is used, it should be noted that ESD footwear alone cannot achieve protection, but needs to be used in conjunction with a suitable ESD floor. (EN 31340-5-2 clause 5.2.8 Footwear)