IkaScope is a wireless oscilloscope probe.
Thanks to ProbeClick® technology, IkaScope knows when to measure and when to hold - Forget that old run/stop button!
From desktop to smartphone, we've got you covered.
IkaScope transfers measured signals over high speed wifi connection. It will remember your home and office access points and connect to them instantly.
No local network? No problems, IkaScope will create one on the go.
Micro-USB recharging cable
Model name: WS200
Communication: WiFi 802.11 b/g/n/e/i 2.4GHz
Connection: Access Point or Station
Battery charging connector: Micro USB
Input contact: ProbeClick
Operating Temperature: 10°C to 35°C
Altitude < 2000m
Protection Input level: Sample test voltage: 253 VAC 1 min
Input to charging port isolation: Saple test voltage: 1100 VAC 1 min
Battery: Built in Lithium / 420mAh
Application compatibility: Windos / Mac / Linux / Android / iOS
Max sample rate: 200MSps
Analog Bandwidth(-3dB compression): 30MHz at -3dB
Input Voltage: +/-40V range CAT1
Galvanic isolation: Between Input and Charging port
Coupling: AC (true) / DC
Input Impedance: 1MOhm || 14pF
Voltage resolution: 100mV/div up to 10V/div
Max Trace refresh rate: 250 FPS
Sample resolution: 8 bits
Analog Offset range: +/-20V to +/-40V
Memory depth: 4K Points (4 x 1000 points burst buffers)
What's IkaScope battery life?
It depends on how often you use IkaScope. We estimate a 1 week battery life with daily regular use.
IkaScope has a 450mAh battery, and uses our patented ProbeClick technology to save battery life: All power-consuming circuitry is only turned ON when the probe tip is pressed.
Where is the power switch?
IkaScope has no powerswitch. To turn it ON, simply start measuring. IkaScope will detect the pressure on probe tip and turn ON automatically. Similarly, it will automatically switch to different power saving modes when the probe tip is released.
Will it work if I don't have a smartphone or Tablet?
Of course. IkaScope works on Desktop computer (Windows, Mac, Linux) as well as on mobile devices like tablets or smartphones.
My Desktop computer does not have Wifi, can I still use IkaScope?
The short answer is Yes, you can.
IkaScope works with Wifi. As long as your computer is connected (via ethernet) to the same network as wifi access point, you'll be able to use IkaScope with your ethernet-wired desktop computer.
As a matter of fact, that's the infrastructure of most office and home networks.
Can I share measurements?
Absolutely. IkaScope software has a share button on the top left of the screen. Simply click on it and follow intructions to share a screenshot of your measure.
Where do I connect the ground wire?
Like any measurement device, IkaScope needs two connections to a circuit to perform measurements. IkaScope ships with a standard ground clip allowing you to connect to the common point of your circuit.
Why Use Wifi instead of Bluetooth?
Wifi has many advantages that bluetooth couldn't offer:
Wifi is fast - it allows a refresh rate of 250 FPS in real time
Wifi works on laptops, desktops, smartphones and tablets. Bluetooth does not have such a coverage. Most laptops and desktops do not have Bluetooth connection.
Can I connect IkaScope via USB?
USB is only used to recharge IkaScope, no data transfer can be made in any way by USB. As a matter of fact, the USB connection is isolated, so you don't have to worry about ground loops, even when recharging IkaScope