Black November

Rohde & Schwarz RTC1K-COM2 All Inclusive

-45% Rohde & Schwarz RTC1K-COM2 All Inclusive
Il Rohde & Schwarz RTC1K-COM2 è un oscilloscopio a segnali misti economico 300MHz, 2 canali analogici e 8 canali digitali con tutte le opzioni attivate.

RTC1K-COM2 unit includes:
- R&S RTC-B223 300 MHz bandwidths upgrade
- R&S RT-ZP03 passive probe per channel (total 2 pcs)
- trigger and decoding I2C/SPI (R&S®RTC-K1)
- UART/RS323 (R&S®RTC-K2)
- R&S RTC-B6 waveform generator
- R&S RTC-B1 Mixed Signal Upgrade
- R&S RT-ZL03 Active 8 Channel Logic Probe
- power cord
- getting started manual and safety instructions

From embedded developers to service technicians to educators – the wide range of functions address a broad group of users. State-of-the-art, high-performance technology in an extremely silent design meets the high requirements of today’s customers. These oscilloscopes include a wide range of upgrade options, providing true investment protection for the future.
The R&S®RTC1000 is an X-in-one instrument that offers the functionality of an oscilloscope, logic analyzer, proto- col analyzer, frequency analyzer, pattern generator, function generator, digital voltmeter and component tester in a single instrument.

X-in-1 oscilloscope

With a sampling rate of up to 2 Gsample/s and a memory depth of up to 2 Msample, the R&S®RTC1000 oscilloscope excels in its class. A waveform up- date rate of more than 10 000 waveforms/s ensures a responsive instrument that reliably catches signal faults. Included tools provide quick results, e.g. QuickView, mask tests, FFT, math, cursors and automatic measurements (including statistics).

Logic analyzer
The R&S®RTC-B1 option turns every R&S®RTC1000 into an intuitive-to-use MSO with 8 additional digital channels. The oscilloscope captures and analyzes sig- nals from analog and digital components in an embedded design – synchro- nously and time-correlated to each other. For example, the delay between the input and output of an A/D converter can be conveniently determined using the cursor measurements.

Protocol analyzer
Protocols such as I2C, SPI and CAN/LIN frequently transfer control messages between integrated circuits. The R&S®RTC1000 has versatile options for proto- col-specific triggering and decoding of serial interfaces. Selective acquisition and analysis of relevant events and data is possible. With the hardware-based implementation, smooth operation and a high update rate are ensured even for long acquisitions. This is advantageous, for example, for capturing multiple packetized serial bus signals.

Waveform and pattern generator
The integrated R&S®RTC-B6 waveform and pattern generator up to 50 Mbit/s is useful for educational purposes and for implementing prototype hardware. In addition to common sine, square/pulse, ramp and noise waveforms, it outputs 4-bit patterns. Waveforms and patterns can be imported as CSV files or copied from oscilloscope waveforms. You can preview signals before playing them back to quickly check signal correctness. Predefined patterns for e.g. I2C, SPI, UART and CAN/LIN are provided.

Digital voltmeter
For simultaneous measurements, the R&S®RTC1000 features a 3-digit digital voltmeter (DVM) and six-digit frequency counter on each channel. Provided measurement functions include DC, AC + DC (RMS) and AC (RMS).

Component tester
You will also benefit from the included component tester. A 50 Hz and a 200 Hz measuring frequency are provided to support your potentially tedious search for faulty components. And since a picture says more than a thousand words
– or rather a thousand values – you will be able to tell at a glance if your error analysis is on track.

Frequency analysis mode
Difficult-to-find faults often result from the interaction between time and frequency signals. The FFT function of the R&S®RTC1000 is activated at the push of a button and by simply entering the center frequency and span. Thanks to the R&S®RTC1000 oscilloscopes’ high-performance FFT functionality, signals can be analyzed with up to 128k points. Other practical tools include cursor measurements and autoset in the frequency domain.

Mask test mode
Mask tests quickly reveal whether a specific signal lies within defined tolerance limits. Masks assess the quality and stability of a DUT based on statistical pass/ fail evaluation. Signal anomalies and unexpected results are quickly identified. When the mask is violated, the measurement stops. Each violation generates a pulse output at the AUX-OUT connector of the R&S®RTC1000. This pulse out- put can be used to trigger actions in the measurement setup.

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Male           Buono
  • Visualizzazioni: 3782
  • Marca: Rohde & Schwarz
  • Codice Prodotto: RTC1K-COM2
  • MPN: 1335.7500P97
  • Disponibilità: Ordinabile
Affrettati, questa offerta scade tra:
  • Prezzo Netto:
  • 2.540,00€
  • 1.390,00€
  • Risparmia 45%
  • Prezzo incl. 22% IVA: 3.098,80€ 1.695,80€
  • Data di fine prezzo speciale: 01/04/2021

Tag: resrtc1000, respromomay19


Ottimo prodotto della Siglent sds1202x-e oscilloscopio, e la Batterfly è un ottima Azienda molto veloce sulla spedizione e molto Accurata devo dire grazie, ottimo Staff di persone. Voto 100, sicurame...

Antonio Gullo sopra 26/11/2020

Acquistiamo da anni i camici in cotone/carbonio antistatici dalla Batterfly e i tappetini in gomma antistatici da banco di lavoro. Sono a loro marchio e sicuramente i migliori sul mercato come quali...

Sandro Lotti sopra 25/11/2020