Nel caso abbiate ricevuto una email relativa ad un vostro ordine passato ci scusiamo, si tratta di un errore generato da un nuovo componente. Ora è tutto risolto

PicoConnect 923 10:1 AC-coupled 7 GHz gigabit passive probe

PicoConnect 923 10:1 AC-coupled 7 GHz gigabit passive probe

PicoConnect 923 10:1 AC-coupled 7 GHz gigabit passive probe

Model 921 | 922 923 | 924 925 | 926
Nominal division ratio 20:1 10:1 5:1
Bandwidth (-3dB) > 6 GHz > 7 GHz > 9 GHz
Max. Usable data rate (fundamental) 12 Gb/s 14 Gb/s 18 Gb/s
Transition time < 58.3 ps < 50 ps < 38.8 ps
Probe tip impedance (nominal) 515 Ohm 250 Ohm 220 Ohm
Probe tip capacitance (typical) 0.3 pF 0.3 pF 0.3 pF
Probe tip capacitance (maximum) 0.4 pF 0.4 pF 0.4 pF
Coupling [1] AC | DC AC | DC AC | DC
Continuos AC voltage (maximum)[2] 7 V RMS 5 V RMS 5 V RMS
DC block voltage (max)[2] 50 V | n.a. 50 V | n.a. 50 V | n.a.

[1] AC models pass all frequencies above 160 kHz (–3 dB).
[2] 150 V peak subject to the RMS limitation and non-hazardous signal and connection within the meaning of EN61010 and the Low Voltage Directive.



The PicoConnect 900 Series low-invasive, high-frequency passive probes are designed for microwave and gigabit applications up to 9 GHz and 18 Gb/s. They deliver unprecedented performance and flexibility at a low price.
The probes employ a unique (patent pending) in-PCB construction to realize extremely low capacitance, coplanar microwave integrity, robust reliability and very low cost. The result is a family of miniature interchangeable passive probe heads that cover a range of division ratios, bandwidths and coupling types.

AC or DC coupled probe head
Pico also brings the flexibility of AC or DC coupling, again through selection of interchangeable probe heads. Low-impedance probes load the probed signal, slightly reducing the amplitude. If the signal has a DC bias they will source or sink current to or from the signal source, potentially changing the device operating bias. The AC-coupled probe avoids this DC bias problem. Low-frequency 3 dB cut-off is less than 160 kHz on all AC-coupled models and droop of pulse top or base is < 0.1%/ns.

Load-compensated divide ratio for multiple typical line impedances
The PicoConnect 900 Series low-impedance probes are suited only to the probing of low- impedance test nodes, typically in the range 0 Ω to 100 Ω. Such nodes will usually be terminated transmission lines, generally 50 Ω, 45 Ω or 75 Ω single-ended. It will also be common to use
two probes on 100 Ω or 90 Ω differential lines (50 Ω or 45 Ω single-ended). On the assumption of a test node impedance in this range, the PicoConnect 900 Series probes are ratio- compensated to give an error typically below 2.5% (0.2 dB) and no more than 11% (0.9 dB).

see all PicoConnect 900 gigabit

see all PicoConnect 900 microwave

Scrivi una recensione

Nota: Il codice HTML non viene tradotto!
    Male           Buono
  • Visualizzazioni: 4302
  • Marca: Pico Technology
  • Codice Prodotto: PicoConnect 923
  • MPN: TA276
  • Disponibilità: 1 Settimana
  • Prezzo Netto:
  • 969,00€
  • Prezzo incl. 22% IVA: 1.182,18€

Tag: picoconnect900, picoconnectgiga


Envoi rapide , Tarifs très correct. Fast shipping , and good prices. J'ai précédemment acheté un fer à souder , mais j'ai été étonné qu'il ne propose pas quelque consommable pour démarre...

Mathias sopra 25/01/2021

Acquistato generatore di segnali Rigol e in passato oscilloscopio Rigol e multimetro Fluke. Consegna avvenuta sempre entro i tempi indicati, pacchi ben confezionati con protezione supplementare, corri...

Flavio sopra 24/01/2021