EA Elektro-Automatik BT 20500-180 4U Battery Tester 500V, 180A, 30000W

Click Image for Gallery

EA Elektro-Automatik BT 20500-180 4U is a single output battery tester with regenerative energy recovery, 500V voltage, 180A current and 30000W power.

The battery tester with regenerative energy recovery in the BT 20000 series from EA Elektro-Automatik are two quadrant devices which can perform the function of a charger as well as that of an electronic load (discharging). In discharging mode the device is regenerative and feeds the energy back into the local grid with an efficiency of up to over 96%.

Key features:

Wide range input: 208 V - 480 V, +10%, 3ph AC
Active Power Factor Correction, typical 0.99
Battery tester, 2-quadrants for charge and dischare
In discharge operation regenerative with energy recovery into the grid
Very high efficiency of up to over 96%
High performance with up to 30 kW per unit
Voltages from 0 - 10 V up to 0 - 2000 V
Currents from 0 - 40 A up to 0 - 1000 A
Flexible power regulated DC output/input stages (autoranging)
Regulation modes CV, CC, CP, CR with fast crossover
Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
Galvanically isolated Share-Bus for parallel operation
Master-Slave-Bus for parallel operation
Built-in Interfaces with 1 ms communication speed
Typical battery tester functionality integrated
Integrated Battery test mode, battery simulation
Command languages and drivers: SCPI and ModBus, LabVIEW, IVI

28 models: 3U, 4U, Triple 4U
The EA-BT 20000 series consists of 28 powerful models with a particularly wide range of voltage and current. In contrast to conventional battery test devices, all users with the triple version have three channels with 600 A or one single channel with 1800 A available.

Model	Voltage	Current	Power
EA-BT 20000 3U
BT 20010-600	0 - 10 V	0 - 600 A	0 - 6000 W
BT 20060-500	0 - 60 V	0 - 500 A	0 - 15000 W
BT 20080-500	0 - 80 V	0 - 500 A	0 - 15000 W
BT 20200-210	0 - 200 V	0 - 210 A	0 - 15000 W
BT 20360-120	0 - 360 V	0 - 120 A	0 - 15000 W
BT 20500-90	0 - 500 V	0 - 90 A	0 - 15000 W
BT 20920-60	0 - 920 V	0 - 60 A	0 - 15000 W
BT 21000-40	0 - 1000 V	0 - 40 A	0 - 15000 W
BT 21500-30	0 - 1500 V	0 - 30 A	0 - 15000 W
BT 22000-20	0 - 2000 V	0 - 20 A	0 - 15000 W
EA-BT 20000 4U
BT 20010-1000	0 - 10 V	0 - 1000 A	0 - 10000 W
BT 20060-1000	0 - 60 V	0 - 1000 A	0 - 30000 W
BT 20080-1000	0 - 80 V	0 - 1000 A	0 - 30000 W
BT 20200-420	0 - 200 V	0 - 420 A	0 - 30000 W
BT 20360-240	0 - 360 V	0 - 240 A	0 - 30000 W
BT 20500-180	0 - 500 V	0 - 180 A	0 - 30000 W
BT 20920-120	0 - 920 V	0 - 120 A	0 - 30000 W
BT 21000-80	0 - 1000 V	0 - 80 A	0 - 30000 W
BT 21500-60	0 - 1500 V	0 - 60 A	0 - 30000 W
BT 22000-40	0 - 2000 V	0 - 40 A	0 - 30000 W
EA-BT 20000 TRIPLE 4U
BT 20010-400 Triple	0 - 10 V	0 - 400 A per channel	0 - 4000 W per channel
BT 20010-600 Triple	0 - 10 V	0 - 600 A per channel	0 - 6000 W per channel
BT 20060-340 Triple	0 - 60 V	0 - 340 A per channel	0 - 10000 W per channel
BT 20080-340 Triple	0 - 80 V	0 - 340 A per channel	0 - 10000 W per channel
BT 20200-140 Triple	0 - 200 V	0 - 140 A per channel	0 - 10000 W per channel
BT 20360-80 Triple	0 - 360 V	0 - 80 A per channel	0 - 10000 W per channel
BT 20500-60 Triple	0 - 500 V	0 - 60 A per channel	0 - 10000 W per channel
BT 20920-40 Triple	0 - 920 V	0 - 40 A per channel	0 - 10000 W per channel

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email [email protected]

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 10/24/2022: 3 | indicates that there will be available units arriving on that data

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti

For any other questions please contact us through our main contacts

The 'Extended Warranty', 'Instrument Protection Plan' and 'Instrument Loaner Plan' service options are only applicable to the EA-10000 and EA-20000 series.

Extended Warranty