Elektro Automatik PSB 10500-180 4U 500V 30kW Programmable, Bi-directional DC Source

Elektro Automatik PSB 10500-180 4U 500V 30kW Programmable, Bi-directional DC Source

Elektro Automatik PSB 10500-180 4U Programmable, Bi-directional DC Source with adjustment from: 0-500V , 0-180A , 0-30kW

Elektro Automatik PSB 10000 4U Main Specifications:
- Wide range 342...528 V AC supply for operation on 380 V, 400 V or 480 V grids
- Bidirectional device - power supply and electronic load in one
- Energy recovery with high efficiency
- Power rating: 30 kW per device, expandable up to 1080 kW
- Flexible, power regulated DC<->AC stage
- Various protection circuits (OVP, OCP, OPP, OTP)
- 5"" TFT touch panel with display for values, status and notifications
- Remote sensing with automatic detection
- Galvanically isolated interface (USB, Ethernet, analog)
- Integrated function generator
- Battery test, MPP tracking simulation, PV simulation according to EN 50530
- Optional, digital interface modules
- SCPI and ModBus RTU command set
- LabView VIs and control software for Windows

General
The new bidirectional power supplies of series EA-PSB 10000 off much power in in a small space: 30 kW in only 4 units of height (4U). Compared to series EA-PSB 9000 3U it saves a space of 2U, or one third, when considering the 30 kW of rated power. It also incorporates two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two features the devices offer the functionality of two-quadrants operation as standard. The internal electronic load achieves a high voltage dynamics by discharging the unavoidable capacitance on the DC terminal. For a connected source, the devices are full electronic loads with energy recovery feature, ideal for bigger systems with a total power of up to 1.08 megawatts. In source operation mode the device becomes a flexible, auto-ranging power supply like those of series EA- PSI 9000 3U. It incorporates the advantages of both device types into one and at the same time it eliminates the disadvantages of separate units regarding weight, space requirement, costs and effort to implement them into custom test software.

AC supply
All models are provided with an active Power Factor Correction (PFC) circuit and are designed for operation on a three-phase supply with typical ratings between 380 V and 480 V AC. During load operation, the de- vice recovers the consumed DC energy and feeds it back into the local power network. This helps saving a lot of energy costs.

Source-sink operation
One salient feature of these devices is the coalescence of an electronic load, also called sink, and a power supply, also called source, into one unit. It means, the device cannot only arbitrarily operate as sink or source, the switchover between these two operating modes occurs without interruption and time loss. This is also called two-quadrants operation.

Energy recovery
The most important feature of these devices is that the AC input while connected to the grid is also used as output for the recovery of the supplied DC energy during load operation, which is converted with an efficiency of up to 95%. This way of energy recovery helps to lower costs and can avoid expensive cooling systems, such as they are required for conventional electronic loads which only convert energy into heat. Principle view.

Write a review

Note: HTML is not translated!
    Bad           Good

Batter Fly s.r.l. is an Italian company established in 2002 with VAT number IT02235301203

Main contacts: telephone +39 051 6468377 email [email protected]

The address of our headquarters is Via Collodi 7a, 40012 Calderara di Reno (BO) Italy

All shipments depart from the address of our office indicated above by express courier unless otherwise specified in the order confirmation

For customers resident in Italy, both private and corporate, we apply the VAT of 22%

If the customer has specific VAT exemptions, he must communicate this before issuing the purchase order

For private customers residing outside Italy but within the European Union we apply the VAT of the country of destination

For corporate customers residing outside of Italy but within the European Union we do not apply VAT. However, VAT may be applied in the event that the customer enters an incorrect or non-certified VAT number by the VIES system

Customers can send purchase orders either through the website or by requesting a personalized quote using the specific form or through our main contacts indicated above

Batter Fly has been present for years within the MePa, the electronic market of the public administration. If one or more products are not present, contact us and we will load what is necessary quickly

Product availability is indicated on the product page of interest in various ways:
- Units in stock: 1 or more | indicates the actual units available
- Units in stock: 0, std delivery. 2 weeks | indicates the standard weeks that the supplier indicates for procurement
- Units available arriving on 06/24/2022: 3 | indicates that there will be available units arriving on that date

Products ordered before 3pm are shipped the same day, orders received after 3pm will be shipped the next working day

Each shipment is associated with a tracking number that will be communicated via email to the customer after taking charge by the shipper

To see the shipping costs go here https://www.batterfly.com/shop/consegna

To see the payment methods go here https://www.batterfly.com/shop/pagamenti


For any other questions please contact us through our main contacts

  • Views: 3799
  • Brand: EA Elektro Automatik
  • Product Code: PSB 10500-180 4U
  • MPN: 30000804
  • Warranty: 2 years

Tags: ea-psb-10000

Related Topics
Electric Vehicle Motor and Controller Test

Electric Vehicle Motor and Controller Test

gm77 09/04/2019 0
Each year vehicle electrification continues to increase, with all signs pointing to this trend accelerating in the future. Some of the factors contrib...
Read More